Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
RS ProProduct Type
ESD Tester
Power Source
Mains, Battery
Test Point
Wrist
Tensiunea de alimentare
9V
Maximum Resistance Measurement
750kΩ
Adancime
26mm
Inaltime
115mm
Tip afisare
LED
Standards/Approvals
EN 61340-5-1
Latime
70mm
Minimum Resistance Measurement
35mΩ
Detalii Produs
The RS PRO Compact wrist strap tester can be used to test the integrity of wrist straps, commonly used to protect personnel from electric shocks in ESD (Electrostatic Discharge) protected workstations by providing a quick connection to the ground. LEDs and an audible alarm indicate whether the measured resistance is within the range specified by EN 61340-5-1, which is the accepted ESD protection standard for IEC (International Electrotechnical Commission) member countries.
This tester is lightweight, portable and is powered by a 9 V PP3 battery. It can check whether the wristband is working and fitted properly on the wearer in the range of 750 k Ω to 35 M Ω resistance. It works safely at operating temperatures between +5°C and +30°C
ESD Protect Areas (EPAs), such as assembly or repair benches in ESD-sensitive device applications, require daily use of an ESD Tester for compliance with EN 61340-5-1 standards.
RS PRO is our own brand range and brings you a wide range of high-quality, great Value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Informatii despre stoc temporar indisponibile
€ 371,30
€ 371,30 Buc. (fara TVA)
€ 449,27
€ 449,27 Buc. (cu TVA)
Tip calibrare
Fara calibrare
1
€ 371,30
€ 371,30 Buc. (fara TVA)
€ 449,27
€ 449,27 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
Tip calibrare
Fara calibrare
1
Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
RS ProProduct Type
ESD Tester
Power Source
Mains, Battery
Test Point
Wrist
Tensiunea de alimentare
9V
Maximum Resistance Measurement
750kΩ
Adancime
26mm
Inaltime
115mm
Tip afisare
LED
Standards/Approvals
EN 61340-5-1
Latime
70mm
Minimum Resistance Measurement
35mΩ
Detalii Produs
The RS PRO Compact wrist strap tester can be used to test the integrity of wrist straps, commonly used to protect personnel from electric shocks in ESD (Electrostatic Discharge) protected workstations by providing a quick connection to the ground. LEDs and an audible alarm indicate whether the measured resistance is within the range specified by EN 61340-5-1, which is the accepted ESD protection standard for IEC (International Electrotechnical Commission) member countries.
This tester is lightweight, portable and is powered by a 9 V PP3 battery. It can check whether the wristband is working and fitted properly on the wearer in the range of 750 k Ω to 35 M Ω resistance. It works safely at operating temperatures between +5°C and +30°C
ESD Protect Areas (EPAs), such as assembly or repair benches in ESD-sensitive device applications, require daily use of an ESD Tester for compliance with EN 61340-5-1 standards.
RS PRO is our own brand range and brings you a wide range of high-quality, great Value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
