Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
TE ConnectivityProduct Type
Heat Shrink Boot
Sub Type
Cable Boot
Material
Irradiated Polyolefin
Culoare
Black
Temperatura minima de lucru
-40°C
Temperatura maxima de lucru
125°C
Minimum Inside Diameter
7.4mm
Maximum Inside Diameter
7.4mm
Standards/Approvals
RoHS Compliant
Adhesive Backing
Yes
Series
ESZH-CAP
Tara de origine
Czech Republic
Detalii Produs
The TE Connectivity Easy Seal Zero Halogen Cap is a new addition to the heat-shrinkable, dual-wall tubing portfolio, designed to provide environmental sealing of electrical stub splices used in automotive environments. Caps can effectively be installed, in application, with an air-circulating oven, a belt heater or infrared heat processor, with these methods ensuring a high standard installation.
Informatii despre stoc temporar indisponibile
€ 12,00
€ 0,24 Buc. (Intr-o punga de 50) (fara TVA)
€ 14,52
€ 0,29 Buc. (Intr-o punga de 50) (cu TVA)
50
€ 12,00
€ 0,24 Buc. (Intr-o punga de 50) (fara TVA)
€ 14,52
€ 0,29 Buc. (Intr-o punga de 50) (cu TVA)
Informatii despre stoc temporar indisponibile
50
| Cantitate | Pret unitar | Per Punga |
|---|---|---|
| 50 - 200 | € 0,24 | € 12,00 |
| 250 - 450 | € 0,23 | € 11,50 |
| 500 - 950 | € 0,21 | € 10,50 |
| 1000 - 2450 | € 0,20 | € 10,00 |
| 2500+ | € 0,18 | € 9,00 |
Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
TE ConnectivityProduct Type
Heat Shrink Boot
Sub Type
Cable Boot
Material
Irradiated Polyolefin
Culoare
Black
Temperatura minima de lucru
-40°C
Temperatura maxima de lucru
125°C
Minimum Inside Diameter
7.4mm
Maximum Inside Diameter
7.4mm
Standards/Approvals
RoHS Compliant
Adhesive Backing
Yes
Series
ESZH-CAP
Tara de origine
Czech Republic
Detalii Produs
The TE Connectivity Easy Seal Zero Halogen Cap is a new addition to the heat-shrinkable, dual-wall tubing portfolio, designed to provide environmental sealing of electrical stub splices used in automotive environments. Caps can effectively be installed, in application, with an air-circulating oven, a belt heater or infrared heat processor, with these methods ensuring a high standard installation.
