TE Connectivity Transparent Polyolefin Solder Sleeve 16mm Length 2.9 mm Cable Diameter 1.1 mm Cable Diameter
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
TE ConnectivityProduct Type
Solder Sleeve
Sub Type
Terminator
Sleeve Length
16mm
Material
Polyolefin
Dielectric
2kV
Minimum Cable Diameter
1.1mm
Maximum Cable Diameter
2.9mm
Culoare
Transparent
Temperatura minima de lucru
-55°C
Temperatura maxima de lucru
125°C
Standards/Approvals
ANSI J-STD-004, ANSI J-STD-006
Shrink Temperature
85°C
Serie
B-155
Tara de origine
Mexico
Detalii produs
Wire Termination: Pin, Post & Tab
Each terminator consists of heatshrinkable sleeve containing prefluxed solder preform. To install, simply position the terminator over the pre-stripped wire/pin and apply heat. The sleeve will shrink and the solder will melt and flow, resulting in a perfectly soldered, insulated and strain relieved termination. On connectors where there are several pins to be terminated it is possible to position and recover an entire row of solder sleeves in one go.,Recommended for use with most connector pins/posts/tabs applications such as LED's, switches, multiple row/pin connectors.
Informatii despre stoc temporar indisponibile
€ 788,13
€ 788,13 1 Box of 500 (fara TVA)
€ 953,64
€ 953,64 1 Box of 500 (cu TVA)
1
€ 788,13
€ 788,13 1 Box of 500 (fara TVA)
€ 953,64
€ 953,64 1 Box of 500 (cu TVA)
Informatii despre stoc temporar indisponibile
1
| Cantitate | Pret unitar |
|---|---|
| 1 - 14 | € 788,13 |
| 15 - 49 | € 741,59 |
| 50+ | € 695,80 |
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
TE ConnectivityProduct Type
Solder Sleeve
Sub Type
Terminator
Sleeve Length
16mm
Material
Polyolefin
Dielectric
2kV
Minimum Cable Diameter
1.1mm
Maximum Cable Diameter
2.9mm
Culoare
Transparent
Temperatura minima de lucru
-55°C
Temperatura maxima de lucru
125°C
Standards/Approvals
ANSI J-STD-004, ANSI J-STD-006
Shrink Temperature
85°C
Serie
B-155
Tara de origine
Mexico
Detalii produs
Wire Termination: Pin, Post & Tab
Each terminator consists of heatshrinkable sleeve containing prefluxed solder preform. To install, simply position the terminator over the pre-stripped wire/pin and apply heat. The sleeve will shrink and the solder will melt and flow, resulting in a perfectly soldered, insulated and strain relieved termination. On connectors where there are several pins to be terminated it is possible to position and recover an entire row of solder sleeves in one go.,Recommended for use with most connector pins/posts/tabs applications such as LED's, switches, multiple row/pin connectors.