Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
STMicroelectronicsProduct Type
Communication & Wireless Development Tool
Clasificare
Evaluation Board
RF Technology
RF Transceiver
Utilizare cu
SPSGRF-868
Featured Device
SPSGRF-868
Kit Name
Evaluation Board
Frecventa maxima
868MHz
Interfata
SPI
Standards/Approvals
RoHS
Detalii produs
RF Expansion Boards based on SPSGRF-915 and SPSGRF-868 Modules for STM32 Nucleo, STMicroelectronics
The evaluation boards are based on the SPIRIT1 RF module SPSGRF-xxx, a Low data rate, low power Sub 1GHz transceiver. The SPSGRF-915 module operates in the 915MHz and the SPSGRF-868 module operates in the 868MHz ISM band. They are FCC certified and IC certified. It is compatible with the ST Morpho and Arduino UNO R3 connector layout. The board interfaces with the STM32 microcontroller via SPI connections and GPIO pins. The user can change some of the GPIOs by mounting or removing the resistors.
Informatii despre stoc temporar indisponibile
€ 14,51
€ 14,51 Buc. (fara TVA)
€ 17,56
€ 17,56 Buc. (cu TVA)
1
€ 14,51
€ 14,51 Buc. (fara TVA)
€ 17,56
€ 17,56 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
STMicroelectronicsProduct Type
Communication & Wireless Development Tool
Clasificare
Evaluation Board
RF Technology
RF Transceiver
Utilizare cu
SPSGRF-868
Featured Device
SPSGRF-868
Kit Name
Evaluation Board
Frecventa maxima
868MHz
Interfata
SPI
Standards/Approvals
RoHS
Detalii produs
RF Expansion Boards based on SPSGRF-915 and SPSGRF-868 Modules for STM32 Nucleo, STMicroelectronics
The evaluation boards are based on the SPIRIT1 RF module SPSGRF-xxx, a Low data rate, low power Sub 1GHz transceiver. The SPSGRF-915 module operates in the 915MHz and the SPSGRF-868 module operates in the 868MHz ISM band. They are FCC certified and IC certified. It is compatible with the ST Morpho and Arduino UNO R3 connector layout. The board interfaces with the STM32 microcontroller via SPI connections and GPIO pins. The user can change some of the GPIOs by mounting or removing the resistors.
