Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
STMicroelectronicsProduct Type
Power Management Development Kit
Power Management Function
Power Management
Utilizare cu
Non-Isolated SMPS
Clasificare
Evaluation Board
Featured Device
VIPER16LD
Kit Name
Demonstration Board
Standards/Approvals
RoHS
Tara de origine
Italy
Detalii Produs
The STEVAL-ISA119V1 is a dual output buck demonstration board using the VIPER16LD, a new off-line high voltage converter by STMicroelectronics which has been specifically developed for non-isolated SMPS. Output regulation is easily achieved through a voltage divider to the output voltage.
The VIPER16LD can work with or without an external supply. In the former case, very low standby consumption is possible(< 50 mW at 265 Vac) while in the latter case, the cost and complication of the IC supply network may be reduced.
The other features of the device include an 800 V avalanche-rugged power section, PWM operation at 60 kHz with frequency jittering for lower EMI, limiting current with adjustable set point, on-board soft-start and safe auto-restart after a fault condition.
The available protection features are thermal shutdown with hysteresis and delayed overload protection.
Informatii despre stoc temporar indisponibile
€ 58,54
€ 58,54 Buc. (fara TVA)
€ 70,83
€ 70,83 Buc. (cu TVA)
1
€ 58,54
€ 58,54 Buc. (fara TVA)
€ 70,83
€ 70,83 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
STMicroelectronicsProduct Type
Power Management Development Kit
Power Management Function
Power Management
Utilizare cu
Non-Isolated SMPS
Clasificare
Evaluation Board
Featured Device
VIPER16LD
Kit Name
Demonstration Board
Standards/Approvals
RoHS
Tara de origine
Italy
Detalii Produs
The STEVAL-ISA119V1 is a dual output buck demonstration board using the VIPER16LD, a new off-line high voltage converter by STMicroelectronics which has been specifically developed for non-isolated SMPS. Output regulation is easily achieved through a voltage divider to the output voltage.
The VIPER16LD can work with or without an external supply. In the former case, very low standby consumption is possible(< 50 mW at 265 Vac) while in the latter case, the cost and complication of the IC supply network may be reduced.
The other features of the device include an 800 V avalanche-rugged power section, PWM operation at 60 kHz with frequency jittering for lower EMI, limiting current with adjustable set point, on-board soft-start and safe auto-restart after a fault condition.
The available protection features are thermal shutdown with hysteresis and delayed overload protection.
