Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
STMicroelectronicsCurent iesire
100mA
Product Type
LED Driver ICLED Driver
Tensiune intrare
-0.4, 7V
Input Voltage Type
DC
Montare
Through Hole
Tip pachet
HTSSOP
Number of Pins
16
Maximum Output Voltage
7V
Temperatura minima de lucru
-40°C
Temperatura maxima de lucru
125°C
Lungime
3mm
Standards/Approvals
RoHS
Latime
3mm
Series
LED8102SXTTR
Inaltime
500μm
Automotive Standard
No
Detalii Produs
The STMicroelectronics LED8102S is a monolithic, 8-channel LED driver with direct switch control. It is equipped with a thermal management that protects the device forcing it in shutdown (typically: power-off at 170 °C with 15 °C hysteresis to restart). LEDs brightness can be adjusted with a global PWM signal applied to the output enable pin (OE), on all active outputs. The outputs can be connected in parallel, or left unconnected if not used, as required by application. Thermal protection switches OFF only the output channels.
Inspiră. Proiectează. Colaborează
ÎNSCRIE-TE GRATIS
Fara taxe ascunse!
Informatii despre stoc temporar indisponibile
€ 1.975,00
€ 0,79 Buc. (Pe o rola de 2500) (fara TVA)
€ 2.389,75
€ 0,956 Buc. (Pe o rola de 2500) (cu TVA)
2500
€ 1.975,00
€ 0,79 Buc. (Pe o rola de 2500) (fara TVA)
€ 2.389,75
€ 0,956 Buc. (Pe o rola de 2500) (cu TVA)
Informatii despre stoc temporar indisponibile
2500
Inspiră. Proiectează. Colaborează
ÎNSCRIE-TE GRATIS
Fara taxe ascunse!
Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
STMicroelectronicsCurent iesire
100mA
Product Type
LED Driver ICLED Driver
Tensiune intrare
-0.4, 7V
Input Voltage Type
DC
Montare
Through Hole
Tip pachet
HTSSOP
Number of Pins
16
Maximum Output Voltage
7V
Temperatura minima de lucru
-40°C
Temperatura maxima de lucru
125°C
Lungime
3mm
Standards/Approvals
RoHS
Latime
3mm
Series
LED8102SXTTR
Inaltime
500μm
Automotive Standard
No
Detalii Produs
The STMicroelectronics LED8102S is a monolithic, 8-channel LED driver with direct switch control. It is equipped with a thermal management that protects the device forcing it in shutdown (typically: power-off at 170 °C with 15 °C hysteresis to restart). LEDs brightness can be adjusted with a global PWM signal applied to the output enable pin (OE), on all active outputs. The outputs can be connected in parallel, or left unconnected if not used, as required by application. Thermal protection switches OFF only the output channels.
Inspiră. Proiectează. Colaborează
ÎNSCRIE-TE GRATIS
Fara taxe ascunse!
