Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
STMicroelectronicsProduct Type
Power Factor Controller IC
Start-up Supply Current
550μA
Maximum Source Current
-700mA
Sub Type
Power Factor Controller IC
Maximum Sink Current
1.5A
Switching Frequency
130kHz
Supply Current
25mA
Montare
Surface
Tip pachet
SO-8
Numar pini
8
Tensiune de alimentare minima
10V
Tensiune de alimentare maxima
24.5V
Temperatura minima de lucru
-40°C
Lungime
5mm
Inaltime
1.75mm
Standards/Approvals
IEC 61000-3-2, JEIDA-MITI
Series
L4985
Temperatura maxima de lucru
150°C
Automotive Standard
No
Detalii Produs
The STMicroelectronics continuous conduction mode power factor correction controller with high voltage start-up to boost converter with a proprietary multiplier "emulator" which in addition to the innovative THD optimizers guarantee very low total harmonic distortion (THD) performance in all operating conditions. This device comes in a pin SO package and offers a high performance/low-component count solution for CCM-operated boost PFC pre-regulators in EN61000-3-2 and JEIDA-MITI compliant applications, in a power range that spans from few hundred W to some kW.
Informatii despre stoc temporar indisponibile
€ 9,44
€ 4,72 Buc. (Intr-un pachet de 2) (fara TVA)
€ 11,42
€ 5,711 Buc. (Intr-un pachet de 2) (cu TVA)
Standard
2
€ 9,44
€ 4,72 Buc. (Intr-un pachet de 2) (fara TVA)
€ 11,42
€ 5,711 Buc. (Intr-un pachet de 2) (cu TVA)
Informatii despre stoc temporar indisponibile
Standard
2
| Cantitate | Pret unitar | Per Pachet |
|---|---|---|
| 2 - 18 | € 4,72 | € 9,44 |
| 20 - 98 | € 2,88 | € 5,76 |
| 100 - 198 | € 2,18 | € 4,36 |
| 200+ | € 1,93 | € 3,86 |
Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
STMicroelectronicsProduct Type
Power Factor Controller IC
Start-up Supply Current
550μA
Maximum Source Current
-700mA
Sub Type
Power Factor Controller IC
Maximum Sink Current
1.5A
Switching Frequency
130kHz
Supply Current
25mA
Montare
Surface
Tip pachet
SO-8
Numar pini
8
Tensiune de alimentare minima
10V
Tensiune de alimentare maxima
24.5V
Temperatura minima de lucru
-40°C
Lungime
5mm
Inaltime
1.75mm
Standards/Approvals
IEC 61000-3-2, JEIDA-MITI
Series
L4985
Temperatura maxima de lucru
150°C
Automotive Standard
No
Detalii Produs
The STMicroelectronics continuous conduction mode power factor correction controller with high voltage start-up to boost converter with a proprietary multiplier "emulator" which in addition to the innovative THD optimizers guarantee very low total harmonic distortion (THD) performance in all operating conditions. This device comes in a pin SO package and offers a high performance/low-component count solution for CCM-operated boost PFC pre-regulators in EN61000-3-2 and JEIDA-MITI compliant applications, in a power range that spans from few hundred W to some kW.