Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
STMicroelectronicsProduct Type
Evaluation Board
Utilizare cu
Shunt Current Sensor Based on the STPM32
Clasificare
Evaluation Board
Featured Device
STEVAL-IPE023V1
Kit Name
Single-Phase Energy Metering Evaluation Board
Standards/Approvals
No
Detalii Produs
The STPM32 energy metering evaluation board is a class 0.2, single-phase meter with shunt current sensor for power line systems with Vnom= 140 to 300 V(RMS), Inom/ Imax= 5/100 A(RMS), flin= 50/60 Hz ± 10% and Tamb= -40 to +85 °C.
Measured active/reactive power can be output from two programmable LEDs on the board. The board can be interfaced with a PC running evaluation software through an isolated RS232 port, or through the STEVAL-IPE023V1 USB isolated interface tool for configuration and data reading. The board also has SPI/UART pins available to interface a microcontroller for application development.
Informatii despre stoc temporar indisponibile
€ 108,84
€ 108,84 Buc. (fara TVA)
€ 131,70
€ 131,70 Buc. (cu TVA)
1
€ 108,84
€ 108,84 Buc. (fara TVA)
€ 131,70
€ 131,70 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
STMicroelectronicsProduct Type
Evaluation Board
Utilizare cu
Shunt Current Sensor Based on the STPM32
Clasificare
Evaluation Board
Featured Device
STEVAL-IPE023V1
Kit Name
Single-Phase Energy Metering Evaluation Board
Standards/Approvals
No
Detalii Produs
The STPM32 energy metering evaluation board is a class 0.2, single-phase meter with shunt current sensor for power line systems with Vnom= 140 to 300 V(RMS), Inom/ Imax= 5/100 A(RMS), flin= 50/60 Hz ± 10% and Tamb= -40 to +85 °C.
Measured active/reactive power can be output from two programmable LEDs on the board. The board can be interfaced with a PC running evaluation software through an isolated RS232 port, or through the STEVAL-IPE023V1 USB isolated interface tool for configuration and data reading. The board also has SPI/UART pins available to interface a microcontroller for application development.
