Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
RS ProProduct Type
Terminal Block
Culoare
Clear
Sub Type
Single-Pole Indirect Clamping
Tensiune
450V
Minimum Wire Size AWG
10AWG
Cable CSA
35mm²
Maximum Wire Size AWG
2AWG
Terminal Block Current
170A
Temperatura minima de lucru
85°C
Terminal
Screw
Temperatura maxima de lucru
85°C
Hazardous Area Certification
No
Standards/Approvals
Lloyds, CE, IMQ
Tara de origine
Italy
Detalii Produs
The RS PRO connector is made to protect your electrical system against both overcurrent and short-circuiting.
Each pole of the terminal is bridged internally by a copper busbar that provides low resistance for your connection route. The connector has a single plug with strain relief, along with three receptacles. It also has a voltage rating of 450 V and a current rating of 170 A for your electrical connection.
Found in a spectrum of settings for fused and non-fused electrical applications, this type of connector is used for energy management, power supplies and air conditioning controls. Its perfect for panel boards or junction boxes, providing excellent insulation for your current.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
IEC 898-1; IEC 998-2-1
Informatii despre stoc temporar indisponibile
€ 67,62
€ 22,54 Buc. (Intr-un pachet de 3) (fara TVA)
€ 81,82
€ 27,273 Buc. (Intr-un pachet de 3) (cu TVA)
3
€ 67,62
€ 22,54 Buc. (Intr-un pachet de 3) (fara TVA)
€ 81,82
€ 27,273 Buc. (Intr-un pachet de 3) (cu TVA)
Informatii despre stoc temporar indisponibile
3
| Cantitate | Pret unitar | Per Pachet |
|---|---|---|
| 3 - 87 | € 22,54 | € 67,62 |
| 90 - 177 | € 21,01 | € 63,03 |
| 180+ | € 19,71 | € 59,13 |
Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
RS ProProduct Type
Terminal Block
Culoare
Clear
Sub Type
Single-Pole Indirect Clamping
Tensiune
450V
Minimum Wire Size AWG
10AWG
Cable CSA
35mm²
Maximum Wire Size AWG
2AWG
Terminal Block Current
170A
Temperatura minima de lucru
85°C
Terminal
Screw
Temperatura maxima de lucru
85°C
Hazardous Area Certification
No
Standards/Approvals
Lloyds, CE, IMQ
Tara de origine
Italy
Detalii Produs
The RS PRO connector is made to protect your electrical system against both overcurrent and short-circuiting.
Each pole of the terminal is bridged internally by a copper busbar that provides low resistance for your connection route. The connector has a single plug with strain relief, along with three receptacles. It also has a voltage rating of 450 V and a current rating of 170 A for your electrical connection.
Found in a spectrum of settings for fused and non-fused electrical applications, this type of connector is used for energy management, power supplies and air conditioning controls. Its perfect for panel boards or junction boxes, providing excellent insulation for your current.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
IEC 898-1; IEC 998-2-1
