Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
RS ProProduct Type
Beacon
Light Effect
Flashing
Culoare lentila
Red
Tip bec
Xenon
Current Type
AC
Montare
Wall, Surface
Current Consumption
30mA
Base Diameter
72mm
Tip terminal
PCB Terminal Block
Tensiune de alimentare maxima
115V ac
Temperatura minima de lucru
-20°C
Temperatura maxima de lucru
55°C
Inaltime
107mm
Protectie IP
IP65
Standards/Approvals
No
Tara de origine
United Kingdom
Detalii Produs
Introducing industrial Xenon beacons from RS PRO, a range of high quality flashing beacons ideal for use in a wide range of security and process control applications requiring a low cost and energy efficient signalling solution. This range of durable flashing beacons are available in red and amber, with varying voltages and current draws to suit your needs. The units are supplied fully assembled to enable quick and easy installation via a 2 stud fix mount. The simple design allows you to install the Xenon beacons to a wall or similar surface with ease. This range of flashing beacons from RS PRO are suitable for light and heavy industrial signalling applications, producing a powerful flashing light source to signal hazards and emergencies.
Xenon beacons are an excellent low cost and energy efficient signalling solution ideal for use in industrial applications. They are available in a variety of sizes and colours, most commonly red, amber and green and emit a powerful flashing light that can be used to signal emergencies, hazards and more. xenon beacons are used in a variety of industrial applications with high levels of ambient noise such as:
• Warehouses
• Factories
• Machinery
• Vehicles
• Walkways
• Emergency exits
Xenon Beacons (sometimes called strobes) are are type of light commonly used in hazardous or potentially dangerous environments with high levels of ambient noise. They are controlled via a PCB (printed circuit board) and put out a very brief but bright flash of white light by ionising and then discharging a large current through the xenon gas. They are an excellent signalling solution and are very cost effective and efficient.
This range of Xenon beacons feature a 2 stud fix mount type.
This range of Xenon beacons from RS PRO are available in the following colours and voltages:
1879643 (Amber) 10-100vDC & 20-72vAC (Voltage) 130mA* (Current Draw)
1879642 (Red) 10-100vDC & 20-72vAC (Voltage) 130mA* (Current Draw)
1879644 (Red) 115vAC (Voltage) 30mA (Current Draw)
1879647 (Amber) 230vAC (Voltage) 21mA (Current Draw)
1879646 (Red) 230vAC (Voltage) 21mA (Current Draw).
Informatii despre stoc temporar indisponibile
P.O.A.
1
P.O.A.
Informatii despre stoc temporar indisponibile
1
Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
RS ProProduct Type
Beacon
Light Effect
Flashing
Culoare lentila
Red
Tip bec
Xenon
Current Type
AC
Montare
Wall, Surface
Current Consumption
30mA
Base Diameter
72mm
Tip terminal
PCB Terminal Block
Tensiune de alimentare maxima
115V ac
Temperatura minima de lucru
-20°C
Temperatura maxima de lucru
55°C
Inaltime
107mm
Protectie IP
IP65
Standards/Approvals
No
Tara de origine
United Kingdom
Detalii Produs
Introducing industrial Xenon beacons from RS PRO, a range of high quality flashing beacons ideal for use in a wide range of security and process control applications requiring a low cost and energy efficient signalling solution. This range of durable flashing beacons are available in red and amber, with varying voltages and current draws to suit your needs. The units are supplied fully assembled to enable quick and easy installation via a 2 stud fix mount. The simple design allows you to install the Xenon beacons to a wall or similar surface with ease. This range of flashing beacons from RS PRO are suitable for light and heavy industrial signalling applications, producing a powerful flashing light source to signal hazards and emergencies.
Xenon beacons are an excellent low cost and energy efficient signalling solution ideal for use in industrial applications. They are available in a variety of sizes and colours, most commonly red, amber and green and emit a powerful flashing light that can be used to signal emergencies, hazards and more. xenon beacons are used in a variety of industrial applications with high levels of ambient noise such as:
• Warehouses
• Factories
• Machinery
• Vehicles
• Walkways
• Emergency exits
Xenon Beacons (sometimes called strobes) are are type of light commonly used in hazardous or potentially dangerous environments with high levels of ambient noise. They are controlled via a PCB (printed circuit board) and put out a very brief but bright flash of white light by ionising and then discharging a large current through the xenon gas. They are an excellent signalling solution and are very cost effective and efficient.
This range of Xenon beacons feature a 2 stud fix mount type.
This range of Xenon beacons from RS PRO are available in the following colours and voltages:
1879643 (Amber) 10-100vDC & 20-72vAC (Voltage) 130mA* (Current Draw)
1879642 (Red) 10-100vDC & 20-72vAC (Voltage) 130mA* (Current Draw)
1879644 (Red) 115vAC (Voltage) 30mA (Current Draw)
1879647 (Amber) 230vAC (Voltage) 21mA (Current Draw)
1879646 (Red) 230vAC (Voltage) 21mA (Current Draw).
