Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
RS ProProduct Type
Cable Marker
Minimum Cable Diameter
2.3mm
Maximum Cable Diameter
5.5mm
Culoare
Yellow
Latime
6.4mm
Printable
Yes
Material
Polyolefin
Temperatura minima de lucru
-55°C
Temperatura maxima de lucru
125°C
Rezistenta la foc
Flame Retardant
Standards/Approvals
cULus, RoHS Compliant
Rezistenta la tractiune
10.3MPa
Tara de origine
China
Detalii Produs
Do you need to label and organise your electrical wires prior to installation? Turn to these RS PRO blank cable marker sleeves. You can use a laser printer to mark multiple labels and affix them to a cable using a heat gun.
The sleeves are made of high-quality, flame retardant polyolefin, which reduces the risk of fire if there's an electrical fault. They're also pre-cut with a dotted line, so you can easily tear them off as required.
Heat shrink sleeves of this type are suitable for use in demanding environments thanks to their good abrasion and chemical resistance. They're also UL 224 certified by Underwriters Laboratories, meaning they're safe to use in electrical wiring insulation.
Informatii despre stoc temporar indisponibile
€ 55,83
€ 55,83 1 Box of 250 (fara TVA)
€ 67,55
€ 67,55 1 Box of 250 (cu TVA)
1
€ 55,83
€ 55,83 1 Box of 250 (fara TVA)
€ 67,55
€ 67,55 1 Box of 250 (cu TVA)
Informatii despre stoc temporar indisponibile
1
Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
RS ProProduct Type
Cable Marker
Minimum Cable Diameter
2.3mm
Maximum Cable Diameter
5.5mm
Culoare
Yellow
Latime
6.4mm
Printable
Yes
Material
Polyolefin
Temperatura minima de lucru
-55°C
Temperatura maxima de lucru
125°C
Rezistenta la foc
Flame Retardant
Standards/Approvals
cULus, RoHS Compliant
Rezistenta la tractiune
10.3MPa
Tara de origine
China
Detalii Produs
Do you need to label and organise your electrical wires prior to installation? Turn to these RS PRO blank cable marker sleeves. You can use a laser printer to mark multiple labels and affix them to a cable using a heat gun.
The sleeves are made of high-quality, flame retardant polyolefin, which reduces the risk of fire if there's an electrical fault. They're also pre-cut with a dotted line, so you can easily tear them off as required.
Heat shrink sleeves of this type are suitable for use in demanding environments thanks to their good abrasion and chemical resistance. They're also UL 224 certified by Underwriters Laboratories, meaning they're safe to use in electrical wiring insulation.
