Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
RaytechProduct Type
Potting Compound
Forma produs
Viscous Liquid
Tip pachet
Plastic Coated Steel Barrel
Package Size
90 g
Culoare
Blue
Temperatura minima de lucru
90°C
Temperatura maxima de lucru
90°C
Standards/Approvals
RoHS
Viscozitate
150 mm²/s, 150 mPa.s
Base Chemical
Adhisive
Tara de origine
Italy
Detalii Produs
Magic Fluid insulating and sealing gel, when cast in suitable casings, is able to replace all types of resins. This is a self-sealing polymer insulation in a bicomponent bag with cold cross linking, with no shelf life. When the separator is removed, the two components mix to trigger the cross linking. Once poured,the insulation, characterised by very low viscosity, surrounds and envelopes any type of material, cross linking in less than 10 minutes. Completely non-toxic, cross linking with a very low isothermal peak that does not thermally stress the materials it comes into contact with. Re-enterable even after long periods of operation.
Informatii despre stoc temporar indisponibile
€ 25,60
€ 25,60 Buc. (fara TVA)
€ 30,98
€ 30,98 Buc. (cu TVA)
1
€ 25,60
€ 25,60 Buc. (fara TVA)
€ 30,98
€ 30,98 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
| Cantitate | Pret unitar |
|---|---|
| 1 - 14 | € 25,60 |
| 15 - 39 | € 24,15 |
| 40+ | € 21,22 |
Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
RaytechProduct Type
Potting Compound
Forma produs
Viscous Liquid
Tip pachet
Plastic Coated Steel Barrel
Package Size
90 g
Culoare
Blue
Temperatura minima de lucru
90°C
Temperatura maxima de lucru
90°C
Standards/Approvals
RoHS
Viscozitate
150 mm²/s, 150 mPa.s
Base Chemical
Adhisive
Tara de origine
Italy
Detalii Produs
Magic Fluid insulating and sealing gel, when cast in suitable casings, is able to replace all types of resins. This is a self-sealing polymer insulation in a bicomponent bag with cold cross linking, with no shelf life. When the separator is removed, the two components mix to trigger the cross linking. Once poured,the insulation, characterised by very low viscosity, surrounds and envelopes any type of material, cross linking in less than 10 minutes. Completely non-toxic, cross linking with a very low isothermal peak that does not thermally stress the materials it comes into contact with. Re-enterable even after long periods of operation.
