Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
P.M.AProduct Type
PID Temperature Controller
Tip iesire
Relay
Numar iesiri
4
Temperatura minima de lucru
0°C
Temperatura maxima de lucru
60°C
Control Type
On-Off
Tensiune de alimentare maxima
260V
Auxiliary Power Supply
22 mA, 18 V
Digital Comms
PROFIBUS-DP Interface, RS422/RS485/Modbus RTU
Diagnostics
Internal Fault, Eeprom, Latched Limit Messages, Sensor Break Or Short Circuit, Fault During Self-Tuning, Basic Diagnostic Functions, Maintenance Interval Of Actuator, Control Loop Alarm, Maintenance Manager and Error List, Re-Calibration Warning, Heating Current Alarm
Maximum Voltage
250V
Tip afisare
LED, Multi Line
Lungime
118mm
Standards/Approvals
EN 61326-1 EMC, cULus, EN 61010-1 (VDE 0411-1), EN 14597 (replaces DIN 3440)
Latime
48mm
Protectie IP
IP65, IP20, IP00
Series
KS92
Montare
Panel
Input Type
Thermocouple, Potentiometer, Current, Voltage, Inp2, Universal Input
Panel Depth
118mm
Tara de origine
United Kingdom
Detalii Produs
The KS 92-1 process controller is suitable for universal, precise, and cost-effective control. The instrument provides simple 2-point (on/off) control, continuous PID control, or 3-point stepping control.
The process value signal is connected via a universal input. A supplementary analogue input can be used for heating current measurement, as an external set-point inputter for position feedback measurement of motorised stepping controllers.
The optional 3rd input is a universal input that can be used for several functions, e.g. temperature dependent setpoint correction or differential control. The standard KS 92-1 is suitable for oxygen control using heated and unheated O2 sensors.
The KS 92-1 is particularly suited to the following applications: Furnaces and ovens, Burners and boilers, Plastics processing & Driers.
Informatii despre stoc temporar indisponibile
€ 932,05
€ 932,05 Buc. (fara TVA)
€ 1.127,78
€ 1.127,78 Buc. (cu TVA)
1
€ 932,05
€ 932,05 Buc. (fara TVA)
€ 1.127,78
€ 1.127,78 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
P.M.AProduct Type
PID Temperature Controller
Tip iesire
Relay
Numar iesiri
4
Temperatura minima de lucru
0°C
Temperatura maxima de lucru
60°C
Control Type
On-Off
Tensiune de alimentare maxima
260V
Auxiliary Power Supply
22 mA, 18 V
Digital Comms
PROFIBUS-DP Interface, RS422/RS485/Modbus RTU
Diagnostics
Internal Fault, Eeprom, Latched Limit Messages, Sensor Break Or Short Circuit, Fault During Self-Tuning, Basic Diagnostic Functions, Maintenance Interval Of Actuator, Control Loop Alarm, Maintenance Manager and Error List, Re-Calibration Warning, Heating Current Alarm
Maximum Voltage
250V
Tip afisare
LED, Multi Line
Lungime
118mm
Standards/Approvals
EN 61326-1 EMC, cULus, EN 61010-1 (VDE 0411-1), EN 14597 (replaces DIN 3440)
Latime
48mm
Protectie IP
IP65, IP20, IP00
Series
KS92
Montare
Panel
Input Type
Thermocouple, Potentiometer, Current, Voltage, Inp2, Universal Input
Panel Depth
118mm
Tara de origine
United Kingdom
Detalii Produs
The KS 92-1 process controller is suitable for universal, precise, and cost-effective control. The instrument provides simple 2-point (on/off) control, continuous PID control, or 3-point stepping control.
The process value signal is connected via a universal input. A supplementary analogue input can be used for heating current measurement, as an external set-point inputter for position feedback measurement of motorised stepping controllers.
The optional 3rd input is a universal input that can be used for several functions, e.g. temperature dependent setpoint correction or differential control. The standard KS 92-1 is suitable for oxygen control using heated and unheated O2 sensors.
The KS 92-1 is particularly suited to the following applications: Furnaces and ovens, Burners and boilers, Plastics processing & Driers.
