Pico Technology TA300 Oscilloscope Probe, Current Type, 100 kHz, D9 Connector

Nr. stoc RS: 136-5315Producator: Pico TechnologyCod de producator: TA300Nr. articol Distrelec: 300-85-390
brand-logo

Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)

Specificatii

Product Type

Oscilloscope Probe

Tip sonda

Current

Bandwidth

100kHz

Maximum Common Mode Input Voltage

300V

Tip conector

D9

Model

TA300

Safety Category Level

CAT III

Safety Category Voltage

300V

Standards/Approvals

No

Detalii produs

Pico 40A AC/DC Current Probe, D9 Connector

The TA300 is a 100 kHz bandwidth, single-range 40 A AC or DC current probe using the D9 connector specific to the PicoScope 4444 differential oscilloscope. On connection with the scope, the probe is instantly sensed and the vertical range automatically set up in PicoScope software. The probe is also powered by the scope through the D9 connector.
Note: When using the PicoScope 4444 with USB power (no AC adaptor connected), sensor power is limited to a maximum of 3 x TA300 probes at once.

Pico PC Based Instruments

Informatii despre stoc temporar indisponibile

€ 356,40

€ 356,40 Buc. (fara TVA)

€ 431,24

€ 431,24 Buc. (cu TVA)

Pico Technology TA300 Oscilloscope Probe, Current Type, 100 kHz, D9 Connector

€ 356,40

€ 356,40 Buc. (fara TVA)

€ 431,24

€ 431,24 Buc. (cu TVA)

Pico Technology TA300 Oscilloscope Probe, Current Type, 100 kHz, D9 Connector

Informatii despre stoc temporar indisponibile

Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)

Specificatii

Product Type

Oscilloscope Probe

Tip sonda

Current

Bandwidth

100kHz

Maximum Common Mode Input Voltage

300V

Tip conector

D9

Model

TA300

Safety Category Level

CAT III

Safety Category Voltage

300V

Standards/Approvals

No

Detalii produs

Pico 40A AC/DC Current Probe, D9 Connector

The TA300 is a 100 kHz bandwidth, single-range 40 A AC or DC current probe using the D9 connector specific to the PicoScope 4444 differential oscilloscope. On connection with the scope, the probe is instantly sensed and the vertical range automatically set up in PicoScope software. The probe is also powered by the scope through the D9 connector.
Note: When using the PicoScope 4444 with USB power (no AC adaptor connected), sensor power is limited to a maximum of 3 x TA300 probes at once.

Pico PC Based Instruments