Parker Pneumatic Timer 8 bar max
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
ParkerProduct Type
Pneumatic Timer
Hazardous Area Certification
Conforming to certificate LCIE 866115X, EExe ll T4
Montare
DIN Rail
Presiune minima de operare
3bar
Presiune maxima de operare
8 bar
Frecventa minima de auto-rezonanta
-15°C
Temperatura maxima de lucru
60°C
Standards/Approvals
EN 50014 dated March 1977 (NFC 23514 dated May 1982), EN 50019 dated March 1977 (NFC 23519 dated May 1982)
Detalii produs
Timer Module
A pneumatic timer consists of a solenoid coil/core, operating spring, timing disk, filter and diaphragm. The core moves up into the coil when it has been energized and this leads to pressure on the diaphragm. The diaphragm moves into the top chamber which un-traps the air through the timing disk. By altering the needle valve you can adjust the amount of delay.
Logic Systems
Logic units are best thought of as miniature valves, whose purpose is to influence the behaviour of larger power valves. They achieve this by producing and receiving output and input signals, using the common air supply. In this way, they are able to monitor and control a whole sequence of operations with great accuracy and repeatability.
Informatii despre stoc temporar indisponibile
€ 271,12
€ 271,12 Buc. (fara TVA)
€ 328,06
€ 328,06 Buc. (cu TVA)
1
€ 271,12
€ 271,12 Buc. (fara TVA)
€ 328,06
€ 328,06 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
| Cantitate | Pret unitar |
|---|---|
| 1 - 4 | € 271,12 |
| 5+ | € 257,79 |
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
ParkerProduct Type
Pneumatic Timer
Hazardous Area Certification
Conforming to certificate LCIE 866115X, EExe ll T4
Montare
DIN Rail
Presiune minima de operare
3bar
Presiune maxima de operare
8 bar
Frecventa minima de auto-rezonanta
-15°C
Temperatura maxima de lucru
60°C
Standards/Approvals
EN 50014 dated March 1977 (NFC 23514 dated May 1982), EN 50019 dated March 1977 (NFC 23519 dated May 1982)
Detalii produs
Timer Module
A pneumatic timer consists of a solenoid coil/core, operating spring, timing disk, filter and diaphragm. The core moves up into the coil when it has been energized and this leads to pressure on the diaphragm. The diaphragm moves into the top chamber which un-traps the air through the timing disk. By altering the needle valve you can adjust the amount of delay.
Logic Systems
Logic units are best thought of as miniature valves, whose purpose is to influence the behaviour of larger power valves. They achieve this by producing and receiving output and input signals, using the common air supply. In this way, they are able to monitor and control a whole sequence of operations with great accuracy and repeatability.