Panasonic Through Beam Photoelectric Sensor, Fork Sensor, 6 mm Detection Range
Documente tehnice
Specificatii
Marca
PanasonicSensor Style
Fork
Detection Type
Through Beam
Detection Range
6 mm
Tip iesire
NPN
Conexiune electrica
Cable 1 m
Maximum dc Voltage
24V
Tip terminal
Cable
Light Source
Infrared
Protectie IP
IP64
Maximum Current
50 mA
Timp de raspuns
20 μs, 80 μs
Temperatura maxima de lucru
+55°C
Serie
PM-25
Housing Material
PBT (Enclosure), Polycarbonate (Display Section)
Frecventa minima de auto-rezonanta
-25°C
Timp montare
Chassis Mount
Standarde
IEC
Tara de origine
Japan
Detalii produs
PM-25 Series U-Shaped Ultra Small Photoelectric Sensors
Panasonic PM-25 series ultra-small U-shaped micro photoelectric sensors. The PM series sensors feature a through beam detection type with the emitter and receiver contained within a single U-shaped housing. A large operating indicator lights up to make operation identification easy to see from above and from the sides.
The sections where stress concentrates, such as the connecting section of the cable and internal circuit, are covered with a resin. This helps prevent malfunctions caused by vibrations and impacts.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 38,21
Buc. (fara TVA)
€ 45,47
Buc. (cu TVA)
1
€ 38,21
Buc. (fara TVA)
€ 45,47
Buc. (cu TVA)
1
Documente tehnice
Specificatii
Marca
PanasonicSensor Style
Fork
Detection Type
Through Beam
Detection Range
6 mm
Tip iesire
NPN
Conexiune electrica
Cable 1 m
Maximum dc Voltage
24V
Tip terminal
Cable
Light Source
Infrared
Protectie IP
IP64
Maximum Current
50 mA
Timp de raspuns
20 μs, 80 μs
Temperatura maxima de lucru
+55°C
Serie
PM-25
Housing Material
PBT (Enclosure), Polycarbonate (Display Section)
Frecventa minima de auto-rezonanta
-25°C
Timp montare
Chassis Mount
Standarde
IEC
Tara de origine
Japan
Detalii produs
PM-25 Series U-Shaped Ultra Small Photoelectric Sensors
Panasonic PM-25 series ultra-small U-shaped micro photoelectric sensors. The PM series sensors feature a through beam detection type with the emitter and receiver contained within a single U-shaped housing. A large operating indicator lights up to make operation identification easy to see from above and from the sides.
The sections where stress concentrates, such as the connecting section of the cable and internal circuit, are covered with a resin. This helps prevent malfunctions caused by vibrations and impacts.