Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
onsemiProduct Type
Current Sensor IC
Tip pachet
SOIC
Numar pini
8
Montare
Surface
Tensiune de alimentare minima
28V
Tensiune de alimentare maxima
41V
Temperatura minima de lucru
-40°C
Temperatura maxima de lucru
85°C
Lungime
5mm
Inaltime
1.75mm
Standards/Approvals
RoHS, REACH
Series
NCV84120
Automotive Standard
AEC-Q100-011
Detalii Produs
The ON Semiconductor fully protected single channel high side driver that can be used to switch a wide variety of loads, such as bulbs, solenoids, and other actuators. The device incorporates advanced protection features such as active inrush current management, over−temperature shutdown with automatic restart and an overvoltage active clamp. A dedicated current sense pin provides precision analog current monitoring of the output as well as fault indication of short to VD, short circuit to ground and OFF state open load detection.
Informatii despre stoc temporar indisponibile
€ 2.700,00
€ 1,08 Buc. (Pe o rola de 2500) (fara TVA)
€ 3.267,00
€ 1,307 Buc. (Pe o rola de 2500) (cu TVA)
2500
€ 2.700,00
€ 1,08 Buc. (Pe o rola de 2500) (fara TVA)
€ 3.267,00
€ 1,307 Buc. (Pe o rola de 2500) (cu TVA)
Informatii despre stoc temporar indisponibile
2500
Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
onsemiProduct Type
Current Sensor IC
Tip pachet
SOIC
Numar pini
8
Montare
Surface
Tensiune de alimentare minima
28V
Tensiune de alimentare maxima
41V
Temperatura minima de lucru
-40°C
Temperatura maxima de lucru
85°C
Lungime
5mm
Inaltime
1.75mm
Standards/Approvals
RoHS, REACH
Series
NCV84120
Automotive Standard
AEC-Q100-011
Detalii Produs
The ON Semiconductor fully protected single channel high side driver that can be used to switch a wide variety of loads, such as bulbs, solenoids, and other actuators. The device incorporates advanced protection features such as active inrush current management, over−temperature shutdown with automatic restart and an overvoltage active clamp. A dedicated current sense pin provides precision analog current monitoring of the output as well as fault indication of short to VD, short circuit to ground and OFF state open load detection.
