Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
MicrochipProduct Type
Microcontroller
Tip pachet
PDIP
Montare
Through Hole
Numar pini
8
Device Core
PIC
Data Bus Width
8bit
Capacitate RAM
16B
Temperatura minima de lucru
-40°C
Temperatura maxima de lucru
85°C
Lungime
10.16mm
Inaltime
4.95mm
Latime
0.28in
Instruction Set Architecture
RISC
Program Memory Type
FLASH
Number of Timers
1
Detalii Produs
The PIC10F2xx was the first of the PIC10F family to be introduced and is based upon Microchips original baseline architecture. This provides up to 5 MIPs, no interrupts, up to 0.75Kb program memory and up to 24 Bytes data memory. All PIC10F2xx MCUs feature on-board RC Oscillators with ±1% accuracy; certain variants include comparators, 8-Bit ADCs and mTouch™ input channels. 8-pin PDIP, which is useful for development, and 2x3 DFN packages are also available. Debugging is supported through the use of ICD Interface Header AC162059 (RS 623-1020).
PIC10F Microcontrollers (MCUs) are the lowest pin count variants of Microchips extensive range of 8–Bit MCUs. These ultra-low-cost devices have allowed the engineering community to use MCUs in applications that have historically been devoid of such devices. The 6-pin SOT23 package is an Ideal fit where cost/space and functionality are the key considerations.
Informatii despre stoc temporar indisponibile
P.O.A.
Each (In a Tube of 60) (fara TVA)
60
P.O.A.
Each (In a Tube of 60) (fara TVA)
Informatii despre stoc temporar indisponibile
60
Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
MicrochipProduct Type
Microcontroller
Tip pachet
PDIP
Montare
Through Hole
Numar pini
8
Device Core
PIC
Data Bus Width
8bit
Capacitate RAM
16B
Temperatura minima de lucru
-40°C
Temperatura maxima de lucru
85°C
Lungime
10.16mm
Inaltime
4.95mm
Latime
0.28in
Instruction Set Architecture
RISC
Program Memory Type
FLASH
Number of Timers
1
Detalii Produs
The PIC10F2xx was the first of the PIC10F family to be introduced and is based upon Microchips original baseline architecture. This provides up to 5 MIPs, no interrupts, up to 0.75Kb program memory and up to 24 Bytes data memory. All PIC10F2xx MCUs feature on-board RC Oscillators with ±1% accuracy; certain variants include comparators, 8-Bit ADCs and mTouch™ input channels. 8-pin PDIP, which is useful for development, and 2x3 DFN packages are also available. Debugging is supported through the use of ICD Interface Header AC162059 (RS 623-1020).
PIC10F Microcontrollers (MCUs) are the lowest pin count variants of Microchips extensive range of 8–Bit MCUs. These ultra-low-cost devices have allowed the engineering community to use MCUs in applications that have historically been devoid of such devices. The 6-pin SOT23 package is an Ideal fit where cost/space and functionality are the key considerations.