Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
MicrochipProduct Type
Regulator
Tip pachet
SOT-23
Montare
Surface
Polarity
Positive
Quiescent Current
10nA
Numar pini
5
Standards/Approvals
RoHS
Series
MIC5203
Temperatura maxima de lucru
125°C
Maximum Input Voltage
16V
Minimum Input Voltage
2.5V
Automotive Standard
No
Detalii Produs
The Microchip MIC5203-5.0YM5-TR is a μCap 80mA linear voltage regulator with very low dropout voltage and very low ground current , offering better than 3% initial accuracy with a logic-compatible enable input. The μCap regulator design is optimized to work with low-value, low-cost ceramic capacitors. The outputs typically require only 0.47μF of output capacitance for stability. Designed especially for handheld, battery-powered devices, the MIC5203-5.0YM5-TR can be controlled by a CMOS- or TTL-compatible logic signal. When disabled, power consumption drops nearly to zero. If on-off control is not required, the enable pin may be tied to the input for 3-terminal operation. The ground current of the MIC5203 increases only slightly in dropout, further prolonging battery life. Key features include current limiting, over-temperature shutdown, and protection against reversed
Informatii despre stoc temporar indisponibile
€ 1.170,00
€ 0,39 Buc. (Pe o rola de 3000) (fara TVA)
€ 1.415,70
€ 0,472 Buc. (Pe o rola de 3000) (cu TVA)
3000
€ 1.170,00
€ 0,39 Buc. (Pe o rola de 3000) (fara TVA)
€ 1.415,70
€ 0,472 Buc. (Pe o rola de 3000) (cu TVA)
Informatii despre stoc temporar indisponibile
3000
Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
MicrochipProduct Type
Regulator
Tip pachet
SOT-23
Montare
Surface
Polarity
Positive
Quiescent Current
10nA
Numar pini
5
Standards/Approvals
RoHS
Series
MIC5203
Temperatura maxima de lucru
125°C
Maximum Input Voltage
16V
Minimum Input Voltage
2.5V
Automotive Standard
No
Detalii Produs
The Microchip MIC5203-5.0YM5-TR is a μCap 80mA linear voltage regulator with very low dropout voltage and very low ground current , offering better than 3% initial accuracy with a logic-compatible enable input. The μCap regulator design is optimized to work with low-value, low-cost ceramic capacitors. The outputs typically require only 0.47μF of output capacitance for stability. Designed especially for handheld, battery-powered devices, the MIC5203-5.0YM5-TR can be controlled by a CMOS- or TTL-compatible logic signal. When disabled, power consumption drops nearly to zero. If on-off control is not required, the enable pin may be tied to the input for 3-terminal operation. The ground current of the MIC5203 increases only slightly in dropout, further prolonging battery life. Key features include current limiting, over-temperature shutdown, and protection against reversed