Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
MicrochipRata maxima de date
100Mbps
Product Type
Ethernet Transceiver
Sub Type
Transceiver
Standard Supported
IEEE 802.3
Tip pachet
LQFP
Numar pini
48
Tensiune de alimentare maxima
3.3V
Tensiune de alimentare minima
3.3V
Lungime
7.1mm
Inaltime
1.6mm
Standards/Approvals
No
Latime
7.1mm
Supply Current
47mA
Automotive Standard
No
Detalii Produs
The Microchip KSZ8081 series is a single-supply 10Base-T/100Base-TX Ethernet physical-layer transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair cable. The KSZ8081 is a highly-integrated PHY solution. It reduces board cost and simplifies board layout by using on-chip termination resistors for the differential pairs and by integrating a low-noise regulator to supply the 1.2V core, and by offering 1.8/2.5/3.3V digital I/O Interface support.
Informatii despre stoc temporar indisponibile
€ 8,05
€ 1,61 Buc. (Livrat pe rola) (fara TVA)
€ 9,74
€ 1,948 Buc. (Livrat pe rola) (cu TVA)
Impachetare pentru productie (Rola)
5
€ 8,05
€ 1,61 Buc. (Livrat pe rola) (fara TVA)
€ 9,74
€ 1,948 Buc. (Livrat pe rola) (cu TVA)
Informatii despre stoc temporar indisponibile
Impachetare pentru productie (Rola)
5
Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
MicrochipRata maxima de date
100Mbps
Product Type
Ethernet Transceiver
Sub Type
Transceiver
Standard Supported
IEEE 802.3
Tip pachet
LQFP
Numar pini
48
Tensiune de alimentare maxima
3.3V
Tensiune de alimentare minima
3.3V
Lungime
7.1mm
Inaltime
1.6mm
Standards/Approvals
No
Latime
7.1mm
Supply Current
47mA
Automotive Standard
No
Detalii Produs
The Microchip KSZ8081 series is a single-supply 10Base-T/100Base-TX Ethernet physical-layer transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair cable. The KSZ8081 is a highly-integrated PHY solution. It reduces board cost and simplifies board layout by using on-chip termination resistors for the differential pairs and by integrating a low-noise regulator to supply the 1.2V core, and by offering 1.8/2.5/3.3V digital I/O Interface support.