
Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
HartingProduct Type
Hinged Frame
Tip accesoriu
Metal Frame
Dimensiune
16B
Cable Entry Angle
Top
Culoare
Grey
Numar contacte
2
Series
HAN Modular
Utilizare cu
Standard Han Hoods and Housings
Material
Die Cast Zinc
Standards/Approvals
CSA, DNV GL, UL
Dimensiune filet
M3
Minimum Wire Size mm²
4mm²
Maximum Wire Size mm²
10mm²
Tara de origine
Germany
Detalii Produs
This hinged frame provides a metal mounting solution for four-module connector assemblies in industrial environments. Designed for TOP cable entry and compatible with standard Han hoods and housings, it offers a Compact Interface for modular connector configurations. The die-cast zinc construction and grey finish suit heavy-duty applications where robust mechanical support and predictable mating performance are required.
The accessory accepts PE conductor cross-sections from 4mm² up to 10mm².
The frame is rated to operate between -40°C and +125°C.
It holds approvals from CSA, DNV GL and UL for connector accessories.
Conductors should be stripped to a length of 8mm to 10mm.
Use a slotted 0.6 x 3.5mm or a PH2 screwdriver for the fastening screws.
The 1 module is for use with hoods and housings from range 2 – the Harting 10A Series (see stock no. 181-0662 which is typical of that range)
Informatii despre stoc temporar indisponibile
€ 30,72
€ 30,72 Buc. (fara TVA)
€ 37,17
€ 37,17 Buc. (cu TVA)
1
€ 30,72
€ 30,72 Buc. (fara TVA)
€ 37,17
€ 37,17 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
HartingProduct Type
Hinged Frame
Tip accesoriu
Metal Frame
Dimensiune
16B
Cable Entry Angle
Top
Culoare
Grey
Numar contacte
2
Series
HAN Modular
Utilizare cu
Standard Han Hoods and Housings
Material
Die Cast Zinc
Standards/Approvals
CSA, DNV GL, UL
Dimensiune filet
M3
Minimum Wire Size mm²
4mm²
Maximum Wire Size mm²
10mm²
Tara de origine
Germany
Detalii Produs
This hinged frame provides a metal mounting solution for four-module connector assemblies in industrial environments. Designed for TOP cable entry and compatible with standard Han hoods and housings, it offers a Compact Interface for modular connector configurations. The die-cast zinc construction and grey finish suit heavy-duty applications where robust mechanical support and predictable mating performance are required.
The accessory accepts PE conductor cross-sections from 4mm² up to 10mm².
The frame is rated to operate between -40°C and +125°C.
It holds approvals from CSA, DNV GL and UL for connector accessories.
Conductors should be stripped to a length of 8mm to 10mm.
Use a slotted 0.6 x 3.5mm or a PH2 screwdriver for the fastening screws.
The 1 module is for use with hoods and housings from range 2 – the Harting 10A Series (see stock no. 181-0662 which is typical of that range)