Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
FTDI ChipProduct Type
Communication & Wireless Development Tool
Clasificare
Development Kit
Tehnologie
USB-to-Serial Bridge
Utilizare cu
RS232 serial devices
Featured Device
FTDI FT2232H
Kit Name
USB-COM232-PLUS2
Interfata
USB 2.0, RS232
Standards/Approvals
DecaBDE, REACH, WEEE, PFOS, European EMC Directive, RoHS, FCC Part 15 Subpart B
Tara de origine
Thailand
Detalii Produs
The FTDI Chip adapter board provides a simple method of adapting two legacy RS232 serial devices to a modern USB port. This is accomplished by incorporating the industry standard USB2.0 hi-speed serial bridge chip. This module uses a standard USB-miniB device connector for connecting to an upstream host or hub port. This module requires USB device drivers, which is used to make the module appear as two Virtual COM Port (VCP). This allows existing serial communications software, such as HyperTerminal to exchange data through the module to a legacy RS232 peripheral device.
Informatii despre stoc temporar indisponibile
€ 43,21
€ 43,21 Buc. (fara TVA)
€ 52,28
€ 52,28 Buc. (cu TVA)
1
€ 43,21
€ 43,21 Buc. (fara TVA)
€ 52,28
€ 52,28 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
| Cantitate | Pret unitar |
|---|---|
| 1 - 9 | € 43,21 |
| 10+ | € 41,12 |
Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
FTDI ChipProduct Type
Communication & Wireless Development Tool
Clasificare
Development Kit
Tehnologie
USB-to-Serial Bridge
Utilizare cu
RS232 serial devices
Featured Device
FTDI FT2232H
Kit Name
USB-COM232-PLUS2
Interfata
USB 2.0, RS232
Standards/Approvals
DecaBDE, REACH, WEEE, PFOS, European EMC Directive, RoHS, FCC Part 15 Subpart B
Tara de origine
Thailand
Detalii Produs
The FTDI Chip adapter board provides a simple method of adapting two legacy RS232 serial devices to a modern USB port. This is accomplished by incorporating the industry standard USB2.0 hi-speed serial bridge chip. This module uses a standard USB-miniB device connector for connecting to an upstream host or hub port. This module requires USB device drivers, which is used to make the module appear as two Virtual COM Port (VCP). This allows existing serial communications software, such as HyperTerminal to exchange data through the module to a legacy RS232 peripheral device.
