Fluke 175 DMM

Fluke Multimeter, True RMS Capability, 200h Battery Life - FLUKE 175

This handheld multimeter provides precise electrical measurement for field service and bench repair, combining True-RMS acquisition with a clear digital display and Basic diagnostic tools. It is designed for technicians in automation, electronics, electrical and mechanical roles who require accurate AC/DC readings, frequency and capacitance checks, and simple temperature measurements using a supplied bead thermocouple probe.

Features & Benefits

• True-RMS measurement gives accurate readings on non-sinusoidal signals
  DC voltage accuracy of ±0.15% rdg+2 digits supports precision testing
  AC current accuracy of ±1.5% rdg+3 digits enables load verification
  Maximum frequency measurement of 1 kHz allows motor and drive checks
  Resistance resolution down to 50 mΩ assists low-resistance circuit diagnostics
  Alkaline battery operation delivers approximately 200 h for extended field use

**Applications**

• Suitable for commissioning and fault-finding on motor drives
  Ideal for testing control panels and PLC inputs and outputs
  Used for verifying HVAC system sensors and actuators
  Can be used for capacitance and frequency checks on electronic modules
  Used with power distribution inspection to confirm AC/DC voltages

What probes and accessories are supplied for general use?

Standard test leads with 4mm lantern tips and protective cap arrive fitted, and a 9V battery is installed
temperature measurements use the included bead thermocouple probe.

How does the instrument behave with rapidly changing signals?

An analogue-style bargraph updates at a higher rate than the numeric display and a smoothing mode filters Rapid input fluctuations for easier interpretation.

How does it alert when encountering potentially hazardous voltages?

A built-in unsafe-voltage alert notifies the user if measured voltages exceed 30 V, and a test-lead alert warns of lead issues.

What recording and hold functions assist data capture during inspections?

The meter provides display hold, AutoHOLD and a Min–Max–Average recording mode with Min/Max alert to capture transient events.

How is battery and fuse maintenance performed on site?

The design allows battery and fuse replacement without removing the entire case, preserving uptime during routine maintenance.

Supplied with

Fluke 175 True-RMS Digital Multimeter
(1 pair) Test Leads
9V Battery (Installed)
Quick reference guide