FlexLink M5 T-Connector, Connecting Component, Strut Profile 44 x 48 mm, Groove Size 11 mm, Round Tube Size 12 mm

Nr. stoc RS: 289-9026Producator: FlexLinkCod de producator: XCEC 12
brand-logo

Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)

Specificatii

Product Type

Connecting Component

Tip conector

T-Connector

Compatible Groove Size

11 mm

Compatible Strut Profile

44 x 48 mm

Dimensiune filet

M5

Material

Steel

Tipul elementului structural

Beam

Lungime

23.5mm

Compatible Tube Size

12 mm

Product System

XC

Standards/Approvals

No

Tara de origine

Sweden

Detalii produs

T-slot Connector XC

Use to connect beam end to beam side, consists of a threaded shaft, yoke, stop screw and T-slot nut.A 12.2 mm diameter through hole needs to be drilled 22 mm from the end of the beam.,The yoke is placed in the hole and the T-slot nut into the beam side. An Allen key may then be used to tighten the yoke and pull the connector tight. The position of the connector can be easily adjusted.

Informatii despre stoc temporar indisponibile

€ 4,75

€ 4,75 Buc. (fara TVA)

€ 5,75

€ 5,75 Buc. (cu TVA)

FlexLink M5 T-Connector, Connecting Component, Strut Profile 44 x 48 mm, Groove Size 11 mm, Round Tube Size 12 mm

€ 4,75

€ 4,75 Buc. (fara TVA)

€ 5,75

€ 5,75 Buc. (cu TVA)

FlexLink M5 T-Connector, Connecting Component, Strut Profile 44 x 48 mm, Groove Size 11 mm, Round Tube Size 12 mm

Informatii despre stoc temporar indisponibile

Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)

Specificatii

Product Type

Connecting Component

Tip conector

T-Connector

Compatible Groove Size

11 mm

Compatible Strut Profile

44 x 48 mm

Dimensiune filet

M5

Material

Steel

Tipul elementului structural

Beam

Lungime

23.5mm

Compatible Tube Size

12 mm

Product System

XC

Standards/Approvals

No

Tara de origine

Sweden

Detalii produs

T-slot Connector XC

Use to connect beam end to beam side, consists of a threaded shaft, yoke, stop screw and T-slot nut.A 12.2 mm diameter through hole needs to be drilled 22 mm from the end of the beam.,The yoke is placed in the hole and the T-slot nut into the beam side. An Allen key may then be used to tighten the yoke and pull the connector tight. The position of the connector can be easily adjusted.