FlexLink M8 Fastener Yoke, Connecting Component, Strut Profile 44 x 48 mm, Groove Size 11 mm, Round Tube Size 18 mm
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
FlexLinkProduct Type
Connecting Component
Tip conector
Fastener Yoke
Compatible Groove Size
11 mm
Compatible Strut Profile
44 x 48 mm
Dimensiune filet
M8
Material
Die Cast Zinc
Tipul elementului structural
Beam
Lungime
88mm
Compatible Tube Size
18 mm
Product System
XC
Standards/Approvals
No
Tara de origine
Sweden
Detalii produs
Fastener Yokes XC and XF
Offers high vibration resistance and a neat flush finish to connect beam ends to beam side.Through hole of 12.2mm must be drilled near the beam end to accept the yoke, use drill fixture stock-no. 326-5519.,To tighten the yoke, use a ball end Allen key.,Beams may be connected end to end, requiring two yokes, two M6 x 50 caphead screws (DIN912,ISO4762) and two M6 hex nuts per joint.
Informatii despre stoc temporar indisponibile
€ 18,24
€ 18,24 Buc. (fara TVA)
€ 22,07
€ 22,07 Buc. (cu TVA)
1
€ 18,24
€ 18,24 Buc. (fara TVA)
€ 22,07
€ 22,07 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
| Cantitate | Pret unitar |
|---|---|
| 1 - 4 | € 18,24 |
| 5 - 9 | € 17,34 |
| 10+ | € 16,84 |
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
FlexLinkProduct Type
Connecting Component
Tip conector
Fastener Yoke
Compatible Groove Size
11 mm
Compatible Strut Profile
44 x 48 mm
Dimensiune filet
M8
Material
Die Cast Zinc
Tipul elementului structural
Beam
Lungime
88mm
Compatible Tube Size
18 mm
Product System
XC
Standards/Approvals
No
Tara de origine
Sweden
Detalii produs
Fastener Yokes XC and XF
Offers high vibration resistance and a neat flush finish to connect beam ends to beam side.Through hole of 12.2mm must be drilled near the beam end to accept the yoke, use drill fixture stock-no. 326-5519.,To tighten the yoke, use a ball end Allen key.,Beams may be connected end to end, requiring two yokes, two M6 x 50 caphead screws (DIN912,ISO4762) and two M6 hex nuts per joint.