Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
Electro PjpProduct Type
Phase Rotation Tester
Tip conexiune
Test Lead
Overvoltage Category
230 V CAT IV
Greutate
390g
Temperatura minima de lucru
-10°C
Temperatura maxima de lucru
50°C
Lungime
1.5m
Standards/Approvals
européenne « Basse Tension » 2014/35/UE, européenne « RoHS », EN / CEI 60529, EN / CEI 61010031:2015, européenne 2015/863/UE, Règlement européen « REACH » n°1907 / 2006
Minimum Voltage
230V
Maximum Voltage
400V
Tara de origine
France
Detalii Produs
The Electro PJP CPI controller having a set of one IMD test box and two IP2X fused probes leads. It is used for checking the permanent insulation monitors (CPI) of IT earthing systems. The CPI-Test385A offers electrical resistances of 385 ohms, 770 ohms, 3.5k ohms, and 85.5k ohms between its black 4 mm banana terminal and its other 4 mm banana terminals. The "low" resistors are used to simulate a fault and thus cause the CPI to react.
Informatii despre stoc temporar indisponibile
€ 427,26
€ 427,26 Buc. (fara TVA)
€ 516,98
€ 516,98 Buc. (cu TVA)
1
€ 427,26
€ 427,26 Buc. (fara TVA)
€ 516,98
€ 516,98 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
Electro PjpProduct Type
Phase Rotation Tester
Tip conexiune
Test Lead
Overvoltage Category
230 V CAT IV
Greutate
390g
Temperatura minima de lucru
-10°C
Temperatura maxima de lucru
50°C
Lungime
1.5m
Standards/Approvals
européenne « Basse Tension » 2014/35/UE, européenne « RoHS », EN / CEI 60529, EN / CEI 61010031:2015, européenne 2015/863/UE, Règlement européen « REACH » n°1907 / 2006
Minimum Voltage
230V
Maximum Voltage
400V
Tara de origine
France
Detalii Produs
The Electro PJP CPI controller having a set of one IMD test box and two IP2X fused probes leads. It is used for checking the permanent insulation monitors (CPI) of IT earthing systems. The CPI-Test385A offers electrical resistances of 385 ohms, 770 ohms, 3.5k ohms, and 85.5k ohms between its black 4 mm banana terminal and its other 4 mm banana terminals. The "low" resistors are used to simulate a fault and thus cause the CPI to react.
