Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
BroadcomProduct Type
Optocoupler
Montare
Surface Mount
Maximum Forward Voltage
1.8V
Number of Channels
1
Packaging
Tape & Reel
Number of Pins
8
Tip pachet
SO-8
Curent de intrare
DC
Maximum Input Current
230mA
Isolation Voltage
5000Vrms
Temperatura minima de lucru
-40°C
Temperatura maxima de lucru
125°C
Standards/Approvals
RoHS
Series
ACPL
Automotive Standard
AEC-Q100
Detalii Produs
The Broadcom Photovoltaic driver is specifically designed to drive high voltage MOSFETs and/or IGBTs. It consists of an AlGaAs infrared light emitting diode (LED) input stage optically coupled to an output detector circuit. The detector consists of a photovoltaic diode array and a turn-off circuit. The photovoltaic driver is turned on with a minimum input current of 3 mA through the input LED. The MOSFET driver is turned off with an input voltage of 0.6V or less. This becomes a voltage source with galvanic isolation.
Informatii despre stoc temporar indisponibile
€ 8,40
€ 4,20 Buc. (Intr-o punga de 2) (fara TVA)
€ 10,16
€ 5,082 Buc. (Intr-o punga de 2) (cu TVA)
Standard
2
€ 8,40
€ 4,20 Buc. (Intr-o punga de 2) (fara TVA)
€ 10,16
€ 5,082 Buc. (Intr-o punga de 2) (cu TVA)
Informatii despre stoc temporar indisponibile
Standard
2
| Cantitate | Pret unitar | Per Punga |
|---|---|---|
| 2 - 18 | € 4,20 | € 8,40 |
| 20 - 98 | € 3,34 | € 6,68 |
| 100 - 198 | € 2,53 | € 5,06 |
| 200+ | € 2,23 | € 4,46 |
Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
BroadcomProduct Type
Optocoupler
Montare
Surface Mount
Maximum Forward Voltage
1.8V
Number of Channels
1
Packaging
Tape & Reel
Number of Pins
8
Tip pachet
SO-8
Curent de intrare
DC
Maximum Input Current
230mA
Isolation Voltage
5000Vrms
Temperatura minima de lucru
-40°C
Temperatura maxima de lucru
125°C
Standards/Approvals
RoHS
Series
ACPL
Automotive Standard
AEC-Q100
Detalii Produs
The Broadcom Photovoltaic driver is specifically designed to drive high voltage MOSFETs and/or IGBTs. It consists of an AlGaAs infrared light emitting diode (LED) input stage optically coupled to an output detector circuit. The detector consists of a photovoltaic diode array and a turn-off circuit. The photovoltaic driver is turned on with a minimum input current of 3 mA through the input LED. The MOSFET driver is turned off with an input voltage of 0.6V or less. This becomes a voltage source with galvanic isolation.
