Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
BroadcomMontare
Surface
Product Type
Optocoupler
Maximum Forward Voltage
1.5V
Number of Channels
2
Number of Pins
8
Tip pachet
SO-8
Curent de intrare
DC
Maximum Input Current
230mA
Temperatura minima de lucru
-40°C
Maximum Current Transfer Ratio
200%
Temperatura maxima de lucru
105°C
Standards/Approvals
IEC/EN/DIN EN 60747-5-5, CSA approval, RoHS
Minimum Current Transfer Ratio
0.93%
Series
ACPL-054L
Automotive Standard
No
Detalii Produs
The Broadcom ACPL-054L (dual-channel in SO-8 footprint), low-input current, 1-MBd digital opt couplers. These digital opt couplers use an insulating layer between the light-emitting diode and an integrated photon detector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output transistor collector increase the speed up to a hundred times over that of a conventional photo-transistor coupler by reducing the base-collector capacitance.
Informatii despre stoc temporar indisponibile
€ 266,00
€ 2,66 Each (In a Tube of 100) (fara TVA)
€ 321,86
€ 3,219 Each (In a Tube of 100) (cu TVA)
100
€ 266,00
€ 2,66 Each (In a Tube of 100) (fara TVA)
€ 321,86
€ 3,219 Each (In a Tube of 100) (cu TVA)
Informatii despre stoc temporar indisponibile
100
Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
BroadcomMontare
Surface
Product Type
Optocoupler
Maximum Forward Voltage
1.5V
Number of Channels
2
Number of Pins
8
Tip pachet
SO-8
Curent de intrare
DC
Maximum Input Current
230mA
Temperatura minima de lucru
-40°C
Maximum Current Transfer Ratio
200%
Temperatura maxima de lucru
105°C
Standards/Approvals
IEC/EN/DIN EN 60747-5-5, CSA approval, RoHS
Minimum Current Transfer Ratio
0.93%
Series
ACPL-054L
Automotive Standard
No
Detalii Produs
The Broadcom ACPL-054L (dual-channel in SO-8 footprint), low-input current, 1-MBd digital opt couplers. These digital opt couplers use an insulating layer between the light-emitting diode and an integrated photon detector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output transistor collector increase the speed up to a hundred times over that of a conventional photo-transistor coupler by reducing the base-collector capacitance.
