Bartec Bartec Series 2 Position Selector Switch Head, Black Handle, IP66, IP67
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
BartecProduct Type
Selector Switch Head
Iluminat
No
Number of Positions
2
Functionare comutator
Latching
Series
Bartec
Protectie IP
IP66, IP67
Angle of Throw
90 °
Standards/Approvals
DNV, ATEX, KTL, CSA, IECEX, INMETRO, GOST, UL
Culoare actuator
Black
Tara de origine
Germany
Detalii produs
Switch Actuators
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.
Informatii despre stoc temporar indisponibile
€ 45,33
€ 45,33 Buc. (fara TVA)
€ 54,85
€ 54,85 Buc. (cu TVA)
1
€ 45,33
€ 45,33 Buc. (fara TVA)
€ 54,85
€ 54,85 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
| Cantitate | Pret unitar |
|---|---|
| 1 - 4 | € 45,33 |
| 5 - 9 | € 43,56 |
| 10+ | € 41,29 |
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
BartecProduct Type
Selector Switch Head
Iluminat
No
Number of Positions
2
Functionare comutator
Latching
Series
Bartec
Protectie IP
IP66, IP67
Angle of Throw
90 °
Standards/Approvals
DNV, ATEX, KTL, CSA, IECEX, INMETRO, GOST, UL
Culoare actuator
Black
Tara de origine
Germany
Detalii produs
Switch Actuators
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.