Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
Allegro MicrosystemsProduct Type
Hall Effect Sensor
Tip senzor
Hall Effect Sensors
Tehnologie
Chopper Stabilised BiCMOS
Montare
Through Hole
Magnetic Type
Bipolar
Frecventa maxima
800kHz
Tensiune de alimentare minima
3V
Tip pachet
SIP
Tensiune de alimentare maxima
24V
Temperatura minima de lucru
-40°C
Numar pini
3
Temperatura maxima de lucru
150°C
Latime
1.52 mm
Serie
A122
Inaltime
3.02mm
Lungime
4.09mm
Standards/Approvals
Lead (Pb) Free
Supply Current
4mA
Timp de raspuns
25μs
Automotive Standard
AEC-Q100
Detalii produs
A1220/1/2/3 Chopper Stabilised Hall Effect Latches, Allegro Microsystems
The Allegro Microsystems A1220, A1221, A1222, and A1223 Hall-effect Latches include a voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilisation and Schmitt trigger. They are also short circuit protected open-drain output to sink up to 25 mA.
A south pole turns on the output and a north pole turns off the output.
The voltage regulator permits operation with supply voltages of 3 V to 24 V.
Available in two package styles; 3-pin SOT23W for surface-mounting and a three-pin ultra-mini SIP for through-hole mounting.
Hall Effect Sensors, Allegro MicroSystems
Informatii despre stoc temporar indisponibile
€ 21,25
€ 0,85 Each (Supplied in a Bag) (fara TVA)
€ 25,71
€ 1,028 Each (Supplied in a Bag) (cu TVA)
Impachetare pentru productie (Punga)
25
€ 21,25
€ 0,85 Each (Supplied in a Bag) (fara TVA)
€ 25,71
€ 1,028 Each (Supplied in a Bag) (cu TVA)
Informatii despre stoc temporar indisponibile
Impachetare pentru productie (Punga)
25
| Cantitate | Pret unitar | Per Punga |
|---|---|---|
| 25 - 95 | € 0,85 | € 4,25 |
| 100 - 245 | € 0,70 | € 3,50 |
| 250 - 495 | € 0,61 | € 3,05 |
| 500+ | € 0,60 | € 3,00 |
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
Allegro MicrosystemsProduct Type
Hall Effect Sensor
Tip senzor
Hall Effect Sensors
Tehnologie
Chopper Stabilised BiCMOS
Montare
Through Hole
Magnetic Type
Bipolar
Frecventa maxima
800kHz
Tensiune de alimentare minima
3V
Tip pachet
SIP
Tensiune de alimentare maxima
24V
Temperatura minima de lucru
-40°C
Numar pini
3
Temperatura maxima de lucru
150°C
Latime
1.52 mm
Serie
A122
Inaltime
3.02mm
Lungime
4.09mm
Standards/Approvals
Lead (Pb) Free
Supply Current
4mA
Timp de raspuns
25μs
Automotive Standard
AEC-Q100
Detalii produs
A1220/1/2/3 Chopper Stabilised Hall Effect Latches, Allegro Microsystems
The Allegro Microsystems A1220, A1221, A1222, and A1223 Hall-effect Latches include a voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilisation and Schmitt trigger. They are also short circuit protected open-drain output to sink up to 25 mA.
A south pole turns on the output and a north pole turns off the output.
The voltage regulator permits operation with supply voltages of 3 V to 24 V.
Available in two package styles; 3-pin SOT23W for surface-mounting and a three-pin ultra-mini SIP for through-hole mounting.


