Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
Allegro MicrosystemsProduct Type
Hall Effect Sensor
Tip senzor
Hall Effect Sensors
Tehnologie
Chopper Stabilised Precision Hall Effect
Montare
Through Hole
Magnetic Type
Unipolar
Frecventa maxima
800kHz
Tensiune de alimentare minima
3V
Tip pachet
SIP
Tensiune de alimentare maxima
24V
Temperatura minima de lucru
-40°C
Numar pini
3
Temperatura maxima de lucru
150°C
Latime
1.52 mm
Serie
A1120
Inaltime
3.02mm
Lungime
4.09mm
Standards/Approvals
100% matte tin plated, Pb-Free
Supply Current
4mA
Timp de raspuns
25μs
Automotive Standard
AEC-Q100
Detalii produs
A1120/1/2/3/5 Chopper Stabilised Hall Effect Sensor Switches, Allegro Microsystems
The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress.
They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA. The voltage regulator enables supply voltages of 3 V to 24 V.
For the A1120, A1121, A1122, and A1123, a south pole turns on the output and removal turns off the output. For the A1125, it is reversed and the south pole turns off the A1125 output.
Hall Effect Sensors, Allegro MicroSystems
Informatii despre stoc temporar indisponibile
€ 5,35
€ 1,07 Buc. (Intr-un pachet de 5) (fara TVA)
€ 6,47
€ 1,295 Buc. (Intr-un pachet de 5) (cu TVA)
Standard
5
€ 5,35
€ 1,07 Buc. (Intr-un pachet de 5) (fara TVA)
€ 6,47
€ 1,295 Buc. (Intr-un pachet de 5) (cu TVA)
Informatii despre stoc temporar indisponibile
Standard
5
| Cantitate | Pret unitar | Per Pachet |
|---|---|---|
| 5 - 20 | € 1,07 | € 5,35 |
| 25 - 95 | € 0,75 | € 3,75 |
| 100 - 245 | € 0,66 | € 3,30 |
| 250 - 495 | € 0,64 | € 3,20 |
| 500+ | € 0,61 | € 3,05 |
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
Allegro MicrosystemsProduct Type
Hall Effect Sensor
Tip senzor
Hall Effect Sensors
Tehnologie
Chopper Stabilised Precision Hall Effect
Montare
Through Hole
Magnetic Type
Unipolar
Frecventa maxima
800kHz
Tensiune de alimentare minima
3V
Tip pachet
SIP
Tensiune de alimentare maxima
24V
Temperatura minima de lucru
-40°C
Numar pini
3
Temperatura maxima de lucru
150°C
Latime
1.52 mm
Serie
A1120
Inaltime
3.02mm
Lungime
4.09mm
Standards/Approvals
100% matte tin plated, Pb-Free
Supply Current
4mA
Timp de raspuns
25μs
Automotive Standard
AEC-Q100
Detalii produs
A1120/1/2/3/5 Chopper Stabilised Hall Effect Sensor Switches, Allegro Microsystems
The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress.
They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA. The voltage regulator enables supply voltages of 3 V to 24 V.
For the A1120, A1121, A1122, and A1123, a south pole turns on the output and removal turns off the output. For the A1125, it is reversed and the south pole turns off the A1125 output.


