Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
FlukeProduct Type
Proving Unit
Kit Contents
Instruction Sheet, Four AA Batteries, Tpak Hanging Strap
Battery Type
4 x AA Alkaline
Power Source
Battery
Temperatura maxima de lucru
50°C
Standards/Approvals
CISPR 11, IEC610101, IEC610102030, IEC 613261, 47 CFR 15 subpart B, Korea KCC
Latime
7.4cm
Inaltime
4.5cm
Lungime
117.00mm
Tara de origine
Taiwan, Province Of China
Detalii Produs
This proving unit is a compact, battery-operated voltage source intended to confirm the correct operation of no-test-lead FieldSense measurement and other high-impedance instruments in industrial environments. It supplies a steady 240V AC or DC output to allow technicians to perform a test-before-touch sequence, reducing exposure to live systems while validating measurement tools prior to and after on-site measurements.
The unit provides voltage via a central hub for open-fork FieldSense checks and through recessed contacts that activate when probes are inserted for conventional probe-based instruments.
It operates between -10°C and 50°C, with humidity limits that vary by temperature: up to 90% relative humidity from 0°C to 35°C, and up to 70% from 35°C to 55°C.
Recessed probe contacts prevent inadvertent touch, and a simple single-switch operation minimises handling complexity during verification.
The device weighs 0.32 kg including batteries and includes a magnetic hanging strap for convenient hands-free placement.
It conforms to IEC 61010-1 and IEC 61010-2-030 safety standards and is classified under CISPR11 and related EMC regulations for industrial equipment.
TPAK hanging strap, four AA batteries and instruction sheet
Informatii despre stoc temporar indisponibile
€ 256,94
€ 256,94 Buc. (fara TVA)
€ 310,90
€ 310,90 Buc. (cu TVA)
Tip calibrare
Fara calibrare
1
€ 256,94
€ 256,94 Buc. (fara TVA)
€ 310,90
€ 310,90 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
Tip calibrare
Fara calibrare
1
Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
FlukeProduct Type
Proving Unit
Kit Contents
Instruction Sheet, Four AA Batteries, Tpak Hanging Strap
Battery Type
4 x AA Alkaline
Power Source
Battery
Temperatura maxima de lucru
50°C
Standards/Approvals
CISPR 11, IEC610101, IEC610102030, IEC 613261, 47 CFR 15 subpart B, Korea KCC
Latime
7.4cm
Inaltime
4.5cm
Lungime
117.00mm
Tara de origine
Taiwan, Province Of China
Detalii Produs
This proving unit is a compact, battery-operated voltage source intended to confirm the correct operation of no-test-lead FieldSense measurement and other high-impedance instruments in industrial environments. It supplies a steady 240V AC or DC output to allow technicians to perform a test-before-touch sequence, reducing exposure to live systems while validating measurement tools prior to and after on-site measurements.
The unit provides voltage via a central hub for open-fork FieldSense checks and through recessed contacts that activate when probes are inserted for conventional probe-based instruments.
It operates between -10°C and 50°C, with humidity limits that vary by temperature: up to 90% relative humidity from 0°C to 35°C, and up to 70% from 35°C to 55°C.
Recessed probe contacts prevent inadvertent touch, and a simple single-switch operation minimises handling complexity during verification.
The device weighs 0.32 kg including batteries and includes a magnetic hanging strap for convenient hands-free placement.
It conforms to IEC 61010-1 and IEC 61010-2-030 safety standards and is classified under CISPR11 and related EMC regulations for industrial equipment.
TPAK hanging strap, four AA batteries and instruction sheet
