Bartec Bartec Series 2 Position Selector Switch Head, Black Handle
Documente tehnice
Specificatii
Marca
BartecCuloare actuator
Black
Iluminat
No
Number of Positions
2
Actuator Type
Standard Handle
Switch Actuation
Latching
Serie
Bartec
Hazardous Area Certification
ATEX
Angle of Throw
90°
Tara de origine
Germany
Detalii produs
Switch Actuators
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 48,48
Buc. (fara TVA)
€ 57,69
Buc. (cu TVA)
1
€ 48,48
Buc. (fara TVA)
€ 57,69
Buc. (cu TVA)
1
Cumpara in pachete mari
| Cantitate | Pret unitar |
|---|---|
| 1 - 4 | € 48,48 |
| 5 - 9 | € 45,43 |
| 10+ | € 43,16 |
Documente tehnice
Specificatii
Marca
BartecCuloare actuator
Black
Iluminat
No
Number of Positions
2
Actuator Type
Standard Handle
Switch Actuation
Latching
Serie
Bartec
Hazardous Area Certification
ATEX
Angle of Throw
90°
Tara de origine
Germany
Detalii produs
Switch Actuators
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.