Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
Raspberry PiTip produs
Camera Module
Number of Channels
1
Supported Bus Interfaces
CSI-2
Maximum Supported Resolution
3280 x 2464 pixels
Maximum Frame Rate Capture
30fps
Dimensiuni
23.86 x 25 x 9mm
Inaltime
9mm
Lungime
23.86mm
Temperatura maxima de lucru
+60 °C
Temperatura minima de lucru
-20 °C
Latime
25mm
Tara de origine
United Kingdom
Detalii Produs
The Raspberry Pi Bulk board camera module is single channel, 8 megapixels and supports CSI-2 bus interface. It has a maximum frame rate capture of 30fps. This high definition (HD) camera board connects to any Raspberry Pi or compute module, allowing you to create HD videos and still photographs. It utilises the IMX219PQ image sensor from Sony, which offers high-speed video imaging and high sensitivity. It also offers reduced image contamination such as fixed pattern noise and smearing. To connect the camera module to pi, a 15cm ribbon cable is attached to the module slots straight into your Pi Camera Serial Interface port (CSI). Once connected, we can access the camera board via the Multi-Media Abstraction Layer (MMAL) or the Video for Linux (V4L) APIs.
Informatii despre stoc temporar indisponibile
P.O.A.
Buc. (Intr-o cutie de 150) (fara TVA)
150
P.O.A.
Buc. (Intr-o cutie de 150) (fara TVA)
Informatii despre stoc temporar indisponibile
150
Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
Raspberry PiTip produs
Camera Module
Number of Channels
1
Supported Bus Interfaces
CSI-2
Maximum Supported Resolution
3280 x 2464 pixels
Maximum Frame Rate Capture
30fps
Dimensiuni
23.86 x 25 x 9mm
Inaltime
9mm
Lungime
23.86mm
Temperatura maxima de lucru
+60 °C
Temperatura minima de lucru
-20 °C
Latime
25mm
Tara de origine
United Kingdom
Detalii Produs
The Raspberry Pi Bulk board camera module is single channel, 8 megapixels and supports CSI-2 bus interface. It has a maximum frame rate capture of 30fps. This high definition (HD) camera board connects to any Raspberry Pi or compute module, allowing you to create HD videos and still photographs. It utilises the IMX219PQ image sensor from Sony, which offers high-speed video imaging and high sensitivity. It also offers reduced image contamination such as fixed pattern noise and smearing. To connect the camera module to pi, a 15cm ribbon cable is attached to the module slots straight into your Pi Camera Serial Interface port (CSI). Once connected, we can access the camera board via the Multi-Media Abstraction Layer (MMAL) or the Video for Linux (V4L) APIs.
