Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
BaumerProduct Type
Multi-Function Panel Meters
Properties Measured
AC Current
Tip afisare
LED
Cutout Height
45mm
Cutout Width
93mm
Number of Digits
4
Digit Height
14mm
Frecventa minima de auto-rezonanta
-10°C
Temperatura maxima de lucru
60°C
Standards/Approvals
CE
Meter Type
Electrical
Series
PA406
Tara de origine
Spain
Detalii Produs
The Baumer PA406 panel multi-function meter is equipped with an analogue output which delivers 4mA to 20mA signal. This signal can be directly or indirectly proportional to the display's evolution. There are two options to enter the value coordinated, either by keypad (in SCAL mode) or using the teach-in feature (teach mode). Assigning the displayed values requires manual entry. The alarm output on the device provides one relay output. The output can be configured as a time delay or hysteresis.
Informatii despre stoc temporar indisponibile
€ 233,32
€ 233,32 Buc. (fara TVA)
€ 282,32
€ 282,32 Buc. (cu TVA)
1
€ 233,32
€ 233,32 Buc. (fara TVA)
€ 282,32
€ 282,32 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
BaumerProduct Type
Multi-Function Panel Meters
Properties Measured
AC Current
Tip afisare
LED
Cutout Height
45mm
Cutout Width
93mm
Number of Digits
4
Digit Height
14mm
Frecventa minima de auto-rezonanta
-10°C
Temperatura maxima de lucru
60°C
Standards/Approvals
CE
Meter Type
Electrical
Series
PA406
Tara de origine
Spain
Detalii Produs
The Baumer PA406 panel multi-function meter is equipped with an analogue output which delivers 4mA to 20mA signal. This signal can be directly or indirectly proportional to the display's evolution. There are two options to enter the value coordinated, either by keypad (in SCAL mode) or using the teach-in feature (teach mode). Assigning the displayed values requires manual entry. The alarm output on the device provides one relay output. The output can be configured as a time delay or hysteresis.
