Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
RS ProCompatible Battery Size
AAA
Product Type
Battery Holder
Numar celule
2
Sub Type
Battery Holder
Montare
Chassis
Tip material
Polypropylene
Terminal
Coil Spring
Lungime
52.3mm
Standards/Approvals
No
Latime
24.7mm
Inaltime
13mm
Diametru
10.1mm
Series
SN
Tara de origine
Taiwan, Province Of China
Detalii Produs
The RS PRO AAA battery holder is used for inserting cells into battery compartments. It has two nickel-plated steel coiled springs that press against the battery terminals to make electrical contact. Holding two AAA cells in parallel, it delivers an output voltage of 3 V.
The electrical output travels via two colour-coded, unterminated leads, which be soldered or crimped to a printed circuit board or another wire. The device can also connect to two different terminals, such as a press stud battery contact and a ferrule.
Mount the battery holder onto the chassis of the enclosing compartment by using the three pre-drilled mounting holes on the base. The unit measures 52.3 mm by 24.7 mm by 13 mm and is made of black polypropylene (PP) material, which has a high resistance to chemicals. It can be used in small electrical devices at temperatures up to +82°C.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Informatii despre stoc temporar indisponibile
€ 2,58
€ 2,58 Buc. (fara TVA)
€ 3,12
€ 3,12 Buc. (cu TVA)
1
€ 2,58
€ 2,58 Buc. (fara TVA)
€ 3,12
€ 3,12 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
RS ProCompatible Battery Size
AAA
Product Type
Battery Holder
Numar celule
2
Sub Type
Battery Holder
Montare
Chassis
Tip material
Polypropylene
Terminal
Coil Spring
Lungime
52.3mm
Standards/Approvals
No
Latime
24.7mm
Inaltime
13mm
Diametru
10.1mm
Series
SN
Tara de origine
Taiwan, Province Of China
Detalii Produs
The RS PRO AAA battery holder is used for inserting cells into battery compartments. It has two nickel-plated steel coiled springs that press against the battery terminals to make electrical contact. Holding two AAA cells in parallel, it delivers an output voltage of 3 V.
The electrical output travels via two colour-coded, unterminated leads, which be soldered or crimped to a printed circuit board or another wire. The device can also connect to two different terminals, such as a press stud battery contact and a ferrule.
Mount the battery holder onto the chassis of the enclosing compartment by using the three pre-drilled mounting holes on the base. The unit measures 52.3 mm by 24.7 mm by 13 mm and is made of black polypropylene (PP) material, which has a high resistance to chemicals. It can be used in small electrical devices at temperatures up to +82°C.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
