Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
DigilentProduct Type
Development Kit Accessory
Tip accesoriu
Programming Module
Utilizare cu
FPGA Devices
Standards/Approvals
No
Detalii Produs
The JTAG-SMT2 surface-mount programming module allows high-speed programming of Xilinx FPGA devices from a host PC. Users can solder the module directly onto a target board like any other component. Note: The JTAG-SMT2-NC part (RS 134-6473) does not have a USB connector fitted.
An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.
This module is not needed for Digilent Xilinx FPGA boards as they have this functionality built-in.
Informatii despre stoc temporar indisponibile
€ 61,30
€ 61,30 Buc. (fara TVA)
€ 74,17
€ 74,17 Buc. (cu TVA)
1
€ 61,30
€ 61,30 Buc. (fara TVA)
€ 74,17
€ 74,17 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
| Cantitate | Pret unitar |
|---|---|
| 1 - 4 | € 61,30 |
| 5 - 9 | € 57,13 |
| 10+ | € 54,80 |
Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
DigilentProduct Type
Development Kit Accessory
Tip accesoriu
Programming Module
Utilizare cu
FPGA Devices
Standards/Approvals
No
Detalii Produs
The JTAG-SMT2 surface-mount programming module allows high-speed programming of Xilinx FPGA devices from a host PC. Users can solder the module directly onto a target board like any other component. Note: The JTAG-SMT2-NC part (RS 134-6473) does not have a USB connector fitted.
An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.
This module is not needed for Digilent Xilinx FPGA boards as they have this functionality built-in.
