Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
RF SolutionsProduct Type
Remote Control System
Frequency
433MHz
Modulation
FM
Number of Channels
3
Number of Key Fob Buttons
3
Nominal Supply Voltage
12 to 30 V
Temperatura minima de lucru
-10°C
Temperatura maxima de lucru
50°C
Inaltime
42mm
Adancime
112mm
Standards/Approvals
RoHS
Latime
112mm
Raza actiune
100 m
Tara de origine
United Kingdom
Detalii Produs
A highly versatile general purpose Remote Control System for many different applications. Housed in a rugged weatherproof enclosure, The new QUANTAFOB system is ideally suited to any remote switch requirement. Each receiver has 4 relays, using the easy-learn process each relay can be controlled from any switch on any transmitter. Additional transmitters may be added to the system using the same easy-learn process. Installation is by screw terminals to the power supply and the output relay contacts. The output relays are activated by the button press on the transmitter encoder.
Informatii despre stoc temporar indisponibile
€ 112,26
€ 112,26 Buc. (fara TVA)
€ 135,83
€ 135,83 Buc. (cu TVA)
1
€ 112,26
€ 112,26 Buc. (fara TVA)
€ 135,83
€ 135,83 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
| Cantitate | Pret unitar |
|---|---|
| 1 - 4 | € 112,26 |
| 5+ | € 104,66 |
Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
RF SolutionsProduct Type
Remote Control System
Frequency
433MHz
Modulation
FM
Number of Channels
3
Number of Key Fob Buttons
3
Nominal Supply Voltage
12 to 30 V
Temperatura minima de lucru
-10°C
Temperatura maxima de lucru
50°C
Inaltime
42mm
Adancime
112mm
Standards/Approvals
RoHS
Latime
112mm
Raza actiune
100 m
Tara de origine
United Kingdom
Detalii Produs
A highly versatile general purpose Remote Control System for many different applications. Housed in a rugged weatherproof enclosure, The new QUANTAFOB system is ideally suited to any remote switch requirement. Each receiver has 4 relays, using the easy-learn process each relay can be controlled from any switch on any transmitter. Additional transmitters may be added to the system using the same easy-learn process. Installation is by screw terminals to the power supply and the output relay contacts. The output relays are activated by the button press on the transmitter encoder.
