Self-Clinching Standoffs

Self-clinching standoffs are a type of fastener used to insert a load bearing thread into a sheet of material, often in order to raise it above another. They work in a similar way to rivet bushes, allowing greater loads to be fastened to relatively weak material.

They are inserted into a pre-drilled hole, and are then squeezed to force the sheet material to flow into the grooves on the shaft, which secures it into place. The head of the standoff sits flush within the sheet after installation.

What are self-clinching standoffs used for?

Self clinching standoffs are most commonly used to space two components apart, such as a printed circuit board and a metal case. In this instance, keeping the two parts away from each other helps to prevent electrical shorts.

Types of self-clinching standoffs

The two key types of self clinching standoff are through-threaded and blind-threaded. Through-threaded standoffs have a hole the whole way through, whereas blind-threaded standoffs have a hole that is cut off at a specified depth. The advantage of blind threading is that it allows the outer panel to remain smooth and closed.

11
Rezultate
You've made new selections.
Click "aplica filtre" sa vedeti produsele noi.
Filtre aplicate
Vedeti 1 - 11 din 11 rezultate
Alegeti tipul de afisare al produselor:
Rezultate pe pagina
20
  • 20
  • 50
  • 100
Pret
(Pret fara TVA)
Detalii produs Thread Size Fixing Hole Diameter Body Outside Diameter Body Depth Finish Thickness of Material Minimum
RS PRO Steel Zinc Plated Self-Clinching Standoff, M3 M3 5.4mm 5.4mm 12mm Zinc Plated 1mm
RS PRO Steel Zinc Plated Self-Clinching Standoff, M3 M3 5.4mm 5.4mm 6mm Zinc Plated 1mm
RS PRO Steel Clear Passivated, Zinc Self-Clinching Standoff, M3 M3 5.4mm 5.4mm 6mm Clear Passivated, Zinc 1mm
RS PRO Steel Clear Passivated, Zinc Self-Clinching Standoff, M3 M3 5.4mm 5.4mm 8mm Clear Passivated, Zinc 1mm
RS PRO Steel Clear Passivated, Zinc Self-Clinching Standoff, M4 M4 7.1mm 7.1mm 8mm Clear Passivated, Zinc 1.3mm
RS PRO Steel Zinc Plated Self-Clinching Standoff, M3 M3 5.4mm 5.4mm 10mm Zinc Plated 1mm
RS PRO Steel Zinc Plated Self-Clinching Standoff, M4 M4 7.1mm 7.1mm 12mm Zinc Plated 1.3mm
RS PRO Steel Zinc Plated Self-Clinching Standoff, M4 M4 7.1mm 7.1mm 12mm Zinc Plated 1.3mm
RS PRO Steel Zinc Plated Self-Clinching Standoff, M3 M3 5.4mm 5.4mm 10mm Zinc Plated 1mm
RS PRO Steel Zinc Plated Self-Clinching Standoff, M3 M3 5.4mm 5.4mm 12mm Zinc Plated 1mm
RS PRO Steel Zinc Plated Self-Clinching Standoff, M4 M4 7.1mm 7.1mm 8mm Zinc Plated 1.3mm
Verificati disponibilitatea stocului
Introduceti cantitatea pe care o doriti si apoi apasati "Verifica".
Informatia este actualizata zilnic, astfel incat disponibilitatea poate varia in momentul plasarii comenzii.
Nr. stoc RS::
Cantitatea 
Comparati produsele selectate
Puteti compara doar 8 produse in acelasi timp

Comparati produsele selectate
Vedeti 1 - 11 din 11 rezultate