Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
STMicroelectronicsProduct Type
Power Management Development Kit
Power Management Function
Power Management
Utilizare cu
DC-DC Converters, LED Drivers
Clasificare
Evaluation Board
Featured Device
PM8805
Kit Name
Evaluation Board
Standards/Approvals
RoHS
Tara de origine
Italy
Detalii Produs
This reference design integrates a high power standard PoE-PD interface, able to support applications up to 100 W. The PoE-PD interface is based on the PM8805 system in package featuring two embedded active bridges with driving circuitry, a charge pump to drive the high side MOSFETs, a hot swap MOSFET and a standard single-signature interface, including detection, classification, UVLO and inrush current limitation.
The device signals successful PSE type identification to the system: it identifies a 4-pair PSE by monitoring the Ethernet cable pairs and providing the system with a dedicated matrix of Tx signals.
The PM8805 is suitable for building the interface for PoE switch mode power supplies for maximum conversion efficiency, with a PGD signal that can be used to enable downstream DC-DC converters or LED drivers with suitable electrical parameters.
Informatii despre stoc temporar indisponibile
€ 54,72
€ 54,72 Buc. (fara TVA)
€ 66,21
€ 66,21 Buc. (cu TVA)
1
€ 54,72
€ 54,72 Buc. (fara TVA)
€ 66,21
€ 66,21 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
STMicroelectronicsProduct Type
Power Management Development Kit
Power Management Function
Power Management
Utilizare cu
DC-DC Converters, LED Drivers
Clasificare
Evaluation Board
Featured Device
PM8805
Kit Name
Evaluation Board
Standards/Approvals
RoHS
Tara de origine
Italy
Detalii Produs
This reference design integrates a high power standard PoE-PD interface, able to support applications up to 100 W. The PoE-PD interface is based on the PM8805 system in package featuring two embedded active bridges with driving circuitry, a charge pump to drive the high side MOSFETs, a hot swap MOSFET and a standard single-signature interface, including detection, classification, UVLO and inrush current limitation.
The device signals successful PSE type identification to the system: it identifies a 4-pair PSE by monitoring the Ethernet cable pairs and providing the system with a dedicated matrix of Tx signals.
The PM8805 is suitable for building the interface for PoE switch mode power supplies for maximum conversion efficiency, with a PGD signal that can be used to enable downstream DC-DC converters or LED drivers with suitable electrical parameters.
