
Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
STMicroelectronicsProduct Type
Multiplexer
Numar pini
20
Number of Elements per Chip
8
Tip iesire
MOS
Configuration
Octal
Montare
Surface
Tensiune de alimentare minima
-0.7V
Tip pachet
SOIC
Tensiune de alimentare maxima
7V
Maximum On State Resistance
1Ω
Frecventa minima de auto-rezonanta
-40°C
Temperatura maxima de lucru
150°C
Lungime
16mm
Inaltime
3.3mm
Standards/Approvals
No
Series
L9822E
Automotive Standard
No
Detalii Produs
The L9822E is an octal low-side solenoid driver realized in Multipower BCD technology particularly suited for driving lamps, relays and solenoids in automotive environment. The DMOS outputs L9822E has a very low power consumption. Data is transmitted serially to the device using the Serial Peripheral Interface (SPI) protocol. Status monitor function is available on all output lines.
Informatii despre stoc temporar indisponibile
€ 2.292,00
€ 3,82 Buc. (Pe o rola de 600) (fara TVA)
€ 2.773,32
€ 4,622 Buc. (Pe o rola de 600) (cu TVA)
600
€ 2.292,00
€ 3,82 Buc. (Pe o rola de 600) (fara TVA)
€ 2.773,32
€ 4,622 Buc. (Pe o rola de 600) (cu TVA)
Informatii despre stoc temporar indisponibile
600
Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
STMicroelectronicsProduct Type
Multiplexer
Numar pini
20
Number of Elements per Chip
8
Tip iesire
MOS
Configuration
Octal
Montare
Surface
Tensiune de alimentare minima
-0.7V
Tip pachet
SOIC
Tensiune de alimentare maxima
7V
Maximum On State Resistance
1Ω
Frecventa minima de auto-rezonanta
-40°C
Temperatura maxima de lucru
150°C
Lungime
16mm
Inaltime
3.3mm
Standards/Approvals
No
Series
L9822E
Automotive Standard
No
Detalii Produs
The L9822E is an octal low-side solenoid driver realized in Multipower BCD technology particularly suited for driving lamps, relays and solenoids in automotive environment. The DMOS outputs L9822E has a very low power consumption. Data is transmitted serially to the device using the Serial Peripheral Interface (SPI) protocol. Status monitor function is available on all output lines.