Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
STMicroelectronicsProduct Type
Power Board
Power Management Function
Power Management
Utilizare cu
STM32
Clasificare
Adapter Board
Featured Device
STLINK-V3SET
Kit Name
Isolation and Voltage Adapter Board for STLINK-V3SET
Standards/Approvals
2.5 kVrms insulation rating, 300 Vrms basic insulation working voltage per IEC 62368‐1:2014
Detalii Produs
The STMicroelectronics B-STLINK-ISOL board is an additional module for STLINK-V3SET, performing galvanic isolation and voltage adaptation for STM32 microcontroller targets running below 3.3 V down to 1.65 V. The module can be enclosed directly in the original STLINK-V3SET casing, when used as an STM32 debugging probe (JTAG/SWD/SWV/VCP) through the STDC14 connector. It can be also inserted between the STLINK-V3SET main board (MB1441) and its adapter board (MB1440) when providing access to bridge signals and other connectors.
Informatii despre stoc temporar indisponibile
€ 100,26
€ 100,26 Buc. (fara TVA)
€ 121,31
€ 121,31 Buc. (cu TVA)
1
€ 100,26
€ 100,26 Buc. (fara TVA)
€ 121,31
€ 121,31 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
STMicroelectronicsProduct Type
Power Board
Power Management Function
Power Management
Utilizare cu
STM32
Clasificare
Adapter Board
Featured Device
STLINK-V3SET
Kit Name
Isolation and Voltage Adapter Board for STLINK-V3SET
Standards/Approvals
2.5 kVrms insulation rating, 300 Vrms basic insulation working voltage per IEC 62368‐1:2014
Detalii Produs
The STMicroelectronics B-STLINK-ISOL board is an additional module for STLINK-V3SET, performing galvanic isolation and voltage adaptation for STM32 microcontroller targets running below 3.3 V down to 1.65 V. The module can be enclosed directly in the original STLINK-V3SET casing, when used as an STM32 debugging probe (JTAG/SWD/SWV/VCP) through the STDC14 connector. It can be also inserted between the STLINK-V3SET main board (MB1441) and its adapter board (MB1440) when providing access to bridge signals and other connectors.
