Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
RS ProConfigurare contact
SPDT
Functionare comutator
On-On
Contact Current Rating
3 A @ 28 V dc
Tip montare
Panel Mount
Tip terminal
Solder
Actuator Length
9.4mm
Actuator Material
Brass
Material de contact
Silver Plated Coin Silver
Contact Resistance
0.02Ω
Frecventa minima de auto-rezonanta
-30°C
Temperatura de lucru
-30 → +85°C
Temperatura maxima de lucru
+85°C
Standarde
UL Listed
Detalii Produs
This toggle switch from RS PRO is used in numerous applications to switch between two circuits. As a single pole, double throw (SPDT) switch performing on-on operation, it allows only one of the two circuits it controls to be energised at any one time.
The panel-mount switch has terminals sealed with epoxy to prevent contamination during soldering. Its silver contacts offer the highest conductivity while the chrome-plated brass actuator will deliver an extended service life. The switch is housed in a diallyl phthalate case with excellent insulation properties. It will operate down to a minimum temperature of -30˚C and up to a maximum of +85˚C.
The switch conforms to North American UL standards as a safe and effective component.
Also known as a changeover switch, an SPDT switch could be used for example to switch on a red lamp in one position and a green lamp in the other.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards
theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Informatii despre stoc temporar indisponibile
P.O.A.
1
P.O.A.
Informatii despre stoc temporar indisponibile
1
Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
RS ProConfigurare contact
SPDT
Functionare comutator
On-On
Contact Current Rating
3 A @ 28 V dc
Tip montare
Panel Mount
Tip terminal
Solder
Actuator Length
9.4mm
Actuator Material
Brass
Material de contact
Silver Plated Coin Silver
Contact Resistance
0.02Ω
Frecventa minima de auto-rezonanta
-30°C
Temperatura de lucru
-30 → +85°C
Temperatura maxima de lucru
+85°C
Standarde
UL Listed
Detalii Produs
This toggle switch from RS PRO is used in numerous applications to switch between two circuits. As a single pole, double throw (SPDT) switch performing on-on operation, it allows only one of the two circuits it controls to be energised at any one time.
The panel-mount switch has terminals sealed with epoxy to prevent contamination during soldering. Its silver contacts offer the highest conductivity while the chrome-plated brass actuator will deliver an extended service life. The switch is housed in a diallyl phthalate case with excellent insulation properties. It will operate down to a minimum temperature of -30˚C and up to a maximum of +85˚C.
The switch conforms to North American UL standards as a safe and effective component.
Also known as a changeover switch, an SPDT switch could be used for example to switch on a red lamp in one position and a green lamp in the other.
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards
theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
