Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
RS ProProduct Type
Float Valve
Float Included
Yes
Float Material
Plastic
Tara de origine
United Kingdom
Detalii Produs
Need to control the level of liquid in a tank? This float valve from RS PRO will detect changes of elevation in the liquid level and open or close accordingly. It fits most tanks and cisterns and can be fitted through a side inlet.
The valve is manufactured from engineering resin with an impressive tensile strength of 4 tonnes, so you're assured a tough and hardwearing part. It features a removable filter that's easy to clean. It can be used at pressures between 0.15 bar and 14 bar. The tail is one-and-a-quarter inches long and has a half-inch male thread.
The valve is approved by the Water Regulations Advisory Scheme (WRAS) as suitable for use in installations carrying water from the public mains supply. Float valves of this kind are commonly found in reservoirs, storage tanks and condensate tanks.
RS PRO is the own brand of RS. The RS PRO Seal of Approval is your assurance of professional quality, a guarantee that every part is rigorously tested, inspected, and audited against demanding standards. Making RS PRO the Smart Choice for our customers.
Informatii despre stoc temporar indisponibile
€ 25,77
€ 25,77 Buc. (fara TVA)
€ 31,18
€ 31,18 Buc. (cu TVA)
1
€ 25,77
€ 25,77 Buc. (fara TVA)
€ 31,18
€ 31,18 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
1
| Cantitate | Pret unitar |
|---|---|
| 1 - 4 | € 25,77 |
| 5 - 9 | € 24,64 |
| 10+ | € 23,72 |
Documente Tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
RS ProProduct Type
Float Valve
Float Included
Yes
Float Material
Plastic
Tara de origine
United Kingdom
Detalii Produs
Need to control the level of liquid in a tank? This float valve from RS PRO will detect changes of elevation in the liquid level and open or close accordingly. It fits most tanks and cisterns and can be fitted through a side inlet.
The valve is manufactured from engineering resin with an impressive tensile strength of 4 tonnes, so you're assured a tough and hardwearing part. It features a removable filter that's easy to clean. It can be used at pressures between 0.15 bar and 14 bar. The tail is one-and-a-quarter inches long and has a half-inch male thread.
The valve is approved by the Water Regulations Advisory Scheme (WRAS) as suitable for use in installations carrying water from the public mains supply. Float valves of this kind are commonly found in reservoirs, storage tanks and condensate tanks.
RS PRO is the own brand of RS. The RS PRO Seal of Approval is your assurance of professional quality, a guarantee that every part is rigorously tested, inspected, and audited against demanding standards. Making RS PRO the Smart Choice for our customers.
