Megger MFT1721 Multifunction Tester 10000V Earth Resistance Measurement With Wireless
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
MeggerProduct Type
Multifunction Tester
Loop Impedance Test Type
2 Wire, 3 Wire
Automatic RCD Test
Yes
Model
MFT1721
RCD Ramp Test
Yes
Non-Tripping
Yes
Insulation Test Voltage
10000V
Maximum Voltage Measurement
600V
Test Type
Continuity
Earth Resistance Measurement
Yes
Downloadable Data
Yes
Interfata
Wireless
Continuity Test Current
200mA
RCD Test Type
Type A, Type B, AC, Type S
Inaltime
150mm
Lungime
85mm
Greutate
1kg
Standards/Approvals
IEC 61557:2007, IEC 6101030:2010, IEC 610101:2010, IEC 61010031:2008
Latime
235mm
Test Standards
IEC 61010-031:2008, IEC 61557:2007, IEC 61010-30:2010, EC 61010-1:2010
Protectie IP
IP54
Maximum Continuity Resistance
99.9kΩ
Temperatura minima de lucru
-10°C
Temperatura maxima de lucru
55°C
Battery Type
AA Alkaline
Tip priza
BS, BS1363
Tip afisare
LCD
Safety Category Level
CAT IV, CAT III
Safety Category Voltage
500V
Power Source
Battery
Tara de origine
United Kingdom
Detalii produs
Megger MFT1721 Multifunction Tester
The MFT1721 is part of the MFT1701 series from Megger whcih tests low voltage electrical installations to BS7671. Providing all the tests required to complete the necessary electrical certification for industrial, commercial, and domestic fixed wiring installations. The unique design allows it to be operated while mounted on the floor, a ladder-shelf, platform, and held or hung around the neck.
The MFT1721 includes full input protection and safety warnings when a hazardous voltage is present. If live voltages exist on a circuit during insulation or continuity testing, the voltage is displayed on the screen. If this voltage exceeds a safe level, further testing is inhibited, and a warning beep sounds.
Supplied with
MFT1721 - Tester, three wire lead set, mains test lead, switched probe, 12-month calibration certificate, warranty upgradeable to 3 years & moulded case
Informatii despre stoc temporar indisponibile
€ 1.965,60
€ 1.965,60 Buc. (fara TVA)
€ 2.378,38
€ 2.378,38 Buc. (cu TVA)
Tip calibrare
Fara calibrare
1
€ 1.965,60
€ 1.965,60 Buc. (fara TVA)
€ 2.378,38
€ 2.378,38 Buc. (cu TVA)
Informatii despre stoc temporar indisponibile
Tip calibrare
Fara calibrare
1
Documente tehnice (Imaginile sunt cu titlu informativ. Va rugam sa consultati specificatiile tehnice.)
Specificatii
Marca
MeggerProduct Type
Multifunction Tester
Loop Impedance Test Type
2 Wire, 3 Wire
Automatic RCD Test
Yes
Model
MFT1721
RCD Ramp Test
Yes
Non-Tripping
Yes
Insulation Test Voltage
10000V
Maximum Voltage Measurement
600V
Test Type
Continuity
Earth Resistance Measurement
Yes
Downloadable Data
Yes
Interfata
Wireless
Continuity Test Current
200mA
RCD Test Type
Type A, Type B, AC, Type S
Inaltime
150mm
Lungime
85mm
Greutate
1kg
Standards/Approvals
IEC 61557:2007, IEC 6101030:2010, IEC 610101:2010, IEC 61010031:2008
Latime
235mm
Test Standards
IEC 61010-031:2008, IEC 61557:2007, IEC 61010-30:2010, EC 61010-1:2010
Protectie IP
IP54
Maximum Continuity Resistance
99.9kΩ
Temperatura minima de lucru
-10°C
Temperatura maxima de lucru
55°C
Battery Type
AA Alkaline
Tip priza
BS, BS1363
Tip afisare
LCD
Safety Category Level
CAT IV, CAT III
Safety Category Voltage
500V
Power Source
Battery
Tara de origine
United Kingdom
Detalii produs
Megger MFT1721 Multifunction Tester
The MFT1721 is part of the MFT1701 series from Megger whcih tests low voltage electrical installations to BS7671. Providing all the tests required to complete the necessary electrical certification for industrial, commercial, and domestic fixed wiring installations. The unique design allows it to be operated while mounted on the floor, a ladder-shelf, platform, and held or hung around the neck.
The MFT1721 includes full input protection and safety warnings when a hazardous voltage is present. If live voltages exist on a circuit during insulation or continuity testing, the voltage is displayed on the screen. If this voltage exceeds a safe level, further testing is inhibited, and a warning beep sounds.
Supplied with
MFT1721 - Tester, three wire lead set, mains test lead, switched probe, 12-month calibration certificate, warranty upgradeable to 3 years & moulded case