Documente tehnice
Specificatii
Marca
BartecIluminat
Yes
Panel Cut Out Diameter
30.5mm
Montare
Panel Mount
Configurare contact
SPST
Protectie IP
IP67
Dimensiune celula
ComEx
Manufacturer Part No.
07-3363-3823/2000
Tip terminal
Wire Lead
Maximum AC Voltage
230V
Maximum DC Voltage
24V
Frecventa minima de auto-rezonanta
-40°C
Hazardous Area Certification
ATEX
Temperatura maxima de lucru
+50°C
Tara de origine
Germany
Detalii produs
Illuminated Mounting Pushbutton
Illuminated pushbuttons in a range of colours, either N/O or N/C, for floor mounting on TS 35 x 7.5 DIN rail.
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
P.O.A.
1
P.O.A.
1
Documente tehnice
Specificatii
Marca
BartecIluminat
Yes
Panel Cut Out Diameter
30.5mm
Montare
Panel Mount
Configurare contact
SPST
Protectie IP
IP67
Dimensiune celula
ComEx
Manufacturer Part No.
07-3363-3823/2000
Tip terminal
Wire Lead
Maximum AC Voltage
230V
Maximum DC Voltage
24V
Frecventa minima de auto-rezonanta
-40°C
Hazardous Area Certification
ATEX
Temperatura maxima de lucru
+50°C
Tara de origine
Germany
Detalii produs
Illuminated Mounting Pushbutton
Illuminated pushbuttons in a range of colours, either N/O or N/C, for floor mounting on TS 35 x 7.5 DIN rail.
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.