Documente tehnice
Specificatii
Marca
FigaroGases Detected
Methane
Application
Residential Natural Gas Alarm
Tip senzor
Gas Sensors
Dimensiuni
27 x 12.5 x 14.1mm
Greutate
2.8g
Temperatura maxima de lucru
+40 °C
Frecventa minima de auto-rezonanta
0 °C
Detalii produs
NGM2611-E13 Methane Gas Sensor Module
The NGM2611 from Figaro is a pre-calibrated sensor module for natural gas alarms which has been accurately calibrated in Figaros temperature and humidity controlled facility. The module uses the TGS2611-E00 gas sensor which incorporates a filter to reduce the influence of interference gases such as alcohol, resulting in highly selective response to methane. The module is designed to meet the performance requirements of EN50194 and UL1484.
PCB Mounted Gas Sensors
Operating conditions in which Sensors are used will vary with each customer's application. Gas and oxygen sensors are not authorised for use as critical components in life support applications wherein a failure or malfunction of the products may result in injury or threat to life. Non-calibrated PCB gas sensors will not operate properly if not calibrated prior to usage.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 33,60
Buc. (fara TVA)
€ 39,98
Buc. (cu TVA)
1
€ 33,60
Buc. (fara TVA)
€ 39,98
Buc. (cu TVA)
1
Documente tehnice
Specificatii
Marca
FigaroGases Detected
Methane
Application
Residential Natural Gas Alarm
Tip senzor
Gas Sensors
Dimensiuni
27 x 12.5 x 14.1mm
Greutate
2.8g
Temperatura maxima de lucru
+40 °C
Frecventa minima de auto-rezonanta
0 °C
Detalii produs
NGM2611-E13 Methane Gas Sensor Module
The NGM2611 from Figaro is a pre-calibrated sensor module for natural gas alarms which has been accurately calibrated in Figaros temperature and humidity controlled facility. The module uses the TGS2611-E00 gas sensor which incorporates a filter to reduce the influence of interference gases such as alcohol, resulting in highly selective response to methane. The module is designed to meet the performance requirements of EN50194 and UL1484.
PCB Mounted Gas Sensors
Operating conditions in which Sensors are used will vary with each customer's application. Gas and oxygen sensors are not authorised for use as critical components in life support applications wherein a failure or malfunction of the products may result in injury or threat to life. Non-calibrated PCB gas sensors will not operate properly if not calibrated prior to usage.