Documente tehnice
Specificatii
Auto-Negotiation
Yes
Communication Mode
Full Duplex, Half Duplex
Loopback Mode
Internal
Network Interface
MII
Physical Network Type
100BaseTX, 10BaseT
Host Interface
SPI
Temperatura minima de lucru
-40 °C
Temperatura maxima de lucru
+85 °C
Manufacturer Part No.
CW1L-M1E10QM4G
Timp montare
Surface Mount
Standard Supported
IEEE 802.3u
Numar pini
80
Data Rate
100Mbps
Typical Operating Supply Voltage
3.3 V
Tip pachet
LQFP
Marca
WIZnet IncDimensiuni
10 x 10 x 1.45mm
Tara de origine
Korea, Republic Of
Detalii produs
Cosel 600W, PLA Series
The Cosel PLA series switching power supplies are supplied in an enclosed body and are available in a wide selection of power ratings and voltages. They have a universal input voltage tolerance ranging from 85 to 264 Vac. They have a low start up time and all units come with an overcurrent rating over 105% of rating and recovery automatically. For user convenience they are fitted with a green LED to indicate operation.
Standards
UL60950-1, C-UL (CSA60950-1), EN60950-1, EN50178 approved, UL508 approved (PLA15F, PLA30F, LA50F, PLA100F, PLA150F), complies with DEN-AN
Switch Mode - Cosel Closed Frame
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 4,47
Buc. (fara TVA)
€ 5,32
Buc. (cu TVA)
1
€ 4,47
Buc. (fara TVA)
€ 5,32
Buc. (cu TVA)
1
Documente tehnice
Specificatii
Auto-Negotiation
Yes
Communication Mode
Full Duplex, Half Duplex
Loopback Mode
Internal
Network Interface
MII
Physical Network Type
100BaseTX, 10BaseT
Host Interface
SPI
Temperatura minima de lucru
-40 °C
Temperatura maxima de lucru
+85 °C
Manufacturer Part No.
CW1L-M1E10QM4G
Timp montare
Surface Mount
Standard Supported
IEEE 802.3u
Numar pini
80
Data Rate
100Mbps
Typical Operating Supply Voltage
3.3 V
Tip pachet
LQFP
Marca
WIZnet IncDimensiuni
10 x 10 x 1.45mm
Tara de origine
Korea, Republic Of
Detalii produs
Cosel 600W, PLA Series
The Cosel PLA series switching power supplies are supplied in an enclosed body and are available in a wide selection of power ratings and voltages. They have a universal input voltage tolerance ranging from 85 to 264 Vac. They have a low start up time and all units come with an overcurrent rating over 105% of rating and recovery automatically. For user convenience they are fitted with a green LED to indicate operation.
Standards
UL60950-1, C-UL (CSA60950-1), EN60950-1, EN50178 approved, UL508 approved (PLA15F, PLA30F, LA50F, PLA100F, PLA150F), complies with DEN-AN