RS PRO Thermal Interface Pad, 0.127mm Thick, 2.5W/m·K, 49 x 21mm
Documente tehnice
Specificatii
Marca
RS ProDimensiuni
49 x 21mm
Grosime
0.127mm
Lungime
49mm
Latime
21mm
Thermal Conductivity
2.5W/m·K
Self-Adhesive
No
Frecventa minima de auto-rezonanta
-45°C
Temperatura maxima de lucru
+125°C
Culoare
Grey
Temperatura de lucru
-45 → +125 °C
Tara de origine
United Kingdom
Detalii produs
RS PRO Phase Change Interface Material
RS PRO phase change materials are ideal for thermal management applications. Available in this range are phase change interface materials in sheets, resistor pads and as a dispensable paste.
Phase change materials work because they change their state with changes in temperature between the heat source and the heatsink. During this process, the material stores thermal energy which is then released as the material cools. This means that the material can absorb thermal energy as the heat is generated which helps to keep the desired component cool. This improves contact between the surfaces, completely fillling air gaps and increasing heat transfer.
Informatii indisponibile despre stoc
Incercati din nou mai tarziu
€ 1,84
Buc. (Intr-un pachet de 10) (fara TVA)
€ 2,19
Buc. (Intr-un pachet de 10) (cu TVA)
10
€ 1,84
Buc. (Intr-un pachet de 10) (fara TVA)
€ 2,19
Buc. (Intr-un pachet de 10) (cu TVA)
10
Cumpara in pachete mari
Cantitate | Pret unitar | Per Pachet |
---|---|---|
10 - 40 | € 1,84 | € 18,40 |
50 - 90 | € 1,50 | € 15,00 |
100 - 240 | € 1,37 | € 13,70 |
250+ | € 1,13 | € 11,30 |
Documente tehnice
Specificatii
Marca
RS ProDimensiuni
49 x 21mm
Grosime
0.127mm
Lungime
49mm
Latime
21mm
Thermal Conductivity
2.5W/m·K
Self-Adhesive
No
Frecventa minima de auto-rezonanta
-45°C
Temperatura maxima de lucru
+125°C
Culoare
Grey
Temperatura de lucru
-45 → +125 °C
Tara de origine
United Kingdom
Detalii produs
RS PRO Phase Change Interface Material
RS PRO phase change materials are ideal for thermal management applications. Available in this range are phase change interface materials in sheets, resistor pads and as a dispensable paste.
Phase change materials work because they change their state with changes in temperature between the heat source and the heatsink. During this process, the material stores thermal energy which is then released as the material cools. This means that the material can absorb thermal energy as the heat is generated which helps to keep the desired component cool. This improves contact between the surfaces, completely fillling air gaps and increasing heat transfer.