Pramet CCMT Series Lathe Insert for Use with SCLCR 09, 3.97mm Height, 95° Approach, 9.7mm Length

Nr. stoc RS: 866-0534Producator: PrametCod de producator: CCMT 09T304E-FF2:T8430
brand-logo
Vezi toate produsele din Insertii si suport unelte strung

Documente tehnice

Specificatii

Marca

Pramet

Lathe Part

Lathe Insert

Approach Angle

95°

Serie

CCMT

Utilizare cu

SCLCR 09

Lungime

9.7mm

Inaltime

3.97mm

Tara de origine

Czech Republic

Detalii produs

Pramet CCMT Insert

CVD Coated Insert for general internal turning operations. Positive geometry for low depths of cut and finishing applications. For use with SCAC, SCBC, SCDC, SCFC, SCLC and SCXC Holders and Bars.

Turning Inserts

S-ar putea să te intereseze
Seco Rhombic Milling Insert 9.7mm Side Length, 4.5mm Bore Diameter
Seco Rhombic Milling Insert 9.7mm Side Length, 4.5mm Bore DiameterProducator: Seco
P.O.A.Buc. (Intr-un pachet de 10) (fara TVA)
Informatii indisponibile despre stoc

€ 119,16

€ 119,16 1 Box of 10 (fara TVA)

€ 141,80

€ 141,80 1 Box of 10 (cu TVA)

Pramet CCMT Series Lathe Insert for Use with SCLCR 09, 3.97mm Height, 95° Approach, 9.7mm Length

1

Disponibil in multiplu de 1
1€ 119,16
2€ 238,32
3€ 357,48
4€ 476,64
5€ 595,80
6€ 714,96
7€ 834,12
8€ 953,28
9€ 1.072,44
10€ 1.191,60
11€ 1.310,76
12€ 1.429,92
13€ 1.549,08
14€ 1.668,24
15€ 1.787,40

€ 119,16

€ 119,16 1 Box of 10 (fara TVA)

€ 141,80

€ 141,80 1 Box of 10 (cu TVA)

Pramet CCMT Series Lathe Insert for Use with SCLCR 09, 3.97mm Height, 95° Approach, 9.7mm Length
Informatii indisponibile despre stoc

1

Disponibil in multiplu de 1
1€ 119,16
2€ 238,32
3€ 357,48
4€ 476,64
5€ 595,80
6€ 714,96
7€ 834,12
8€ 953,28
9€ 1.072,44
10€ 1.191,60
11€ 1.310,76
12€ 1.429,92
13€ 1.549,08
14€ 1.668,24
15€ 1.787,40

Informatii indisponibile despre stoc

Incercati din nou mai tarziu

S-ar putea să te intereseze
Seco Rhombic Milling Insert 9.7mm Side Length, 4.5mm Bore Diameter
Seco Rhombic Milling Insert 9.7mm Side Length, 4.5mm Bore DiameterProducator: Seco
P.O.A.Buc. (Intr-un pachet de 10) (fara TVA)

Documente tehnice

Specificatii

Marca

Pramet

Lathe Part

Lathe Insert

Approach Angle

95°

Serie

CCMT

Utilizare cu

SCLCR 09

Lungime

9.7mm

Inaltime

3.97mm

Tara de origine

Czech Republic

Detalii produs

Pramet CCMT Insert

CVD Coated Insert for general internal turning operations. Positive geometry for low depths of cut and finishing applications. For use with SCAC, SCBC, SCDC, SCFC, SCLC and SCXC Holders and Bars.

Turning Inserts

S-ar putea să te intereseze
Seco Rhombic Milling Insert 9.7mm Side Length, 4.5mm Bore Diameter
Seco Rhombic Milling Insert 9.7mm Side Length, 4.5mm Bore DiameterProducator: Seco
P.O.A.Buc. (Intr-un pachet de 10) (fara TVA)